EZfender Boat Fender Bumper Hangers

Pontoon Boat & Deck Boat Forum

Open and Honest Pontoon Boat Discussion

 Site Sponsor - pontoon boat seats, furniture and accessories www.pontoonstuff.com - pontoon boat seats, furniture and accessories
It is currently Wed Dec 13, 2017 4:02 am

All times are UTC - 7 hours




Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: 1988 Harris Pontoon Rebuild --- Pontoonstuff.com
PostPosted: Mon Jul 24, 2017 7:35 am 
Offline

Joined: Wed May 10, 2017 10:23 am
Posts: 236
Location: Cincinnati Ohio
Well I got my bunks in for the trailer. Well half of them anyway. They shipped them as singles instead of pairs. So i got enough for one side.

Easy fix I called them up and they are going to have them ship them out quick to me.

While it could be a pain for someone who is missing stuff on an order I do know PS seems to take care of things quickly.

I also know I could have done these myself pretty easy but I figure why not if PS is providing them. So I will be doing a write up on this hopefully this weekend. I want to drop the pontoon in my local lake. Tie it up and do the bunks and guides. So hopefully the weather permits me to do that. Once that is done I have the seats for the bow to play with. And a few other things I will be doing.

Stay tuned as they say

_________________
My rebuild thread.
viewtopic.php?f=16&t=24807


Top
 Profile E-mail  
 
 Post subject: Re: 1988 Harris Pontoon Rebuild --- Pontoonstuff.com
PostPosted: Fri Jul 28, 2017 7:57 pm 
Offline

Joined: Wed May 10, 2017 10:23 am
Posts: 236
Location: Cincinnati Ohio
Ok so The plan this weekend was to go setup the guide ons I got from Pontoonstuff

https://www.pontoonstuff.com/collection ... =683661253

and the bunks I got from them too, after unloading the boat from the trailer.



So most plans get changed for me. I received the guide ons and the bunks. The other missing bunks came in today no problem. So I loaded up the stuff before I left work thinking I would mount the guide ons tonight and then be at the lake early. Fish a little. Then tie up and fix the bunks. So I go to our barn at the farm. Pull the boat out in the sinking sunlight. Get a camera turned on so I can try my hand at a how to. Only to realize the bottom of the deck would hit the top of the guide ons.

Hmm so I think It is a combination of things. First 19 inch pontoons. I am sure the guide ons were designed for 25 and 25+ diameter logs. Plus if you look at the link above the bunks sit up from the cross member. Mine is basically a V shaped piece of metal that is bolted direct to the cross member. I know that may be hard to imagine. But it is dark out so I will take some pics tomorrow and post them.

I emailed PS and I am sure I will hear from them. But it might not be until Monday.

_________________
My rebuild thread.
viewtopic.php?f=16&t=24807


Top
 Profile E-mail  
 
 Post subject: Re: 1988 Harris Pontoon Rebuild --- Pontoonstuff.com
PostPosted: Fri Sep 08, 2017 11:09 am 
Offline

Joined: Wed May 10, 2017 10:23 am
Posts: 236
Location: Cincinnati Ohio
So I have been super busy at work. But I have managed a couple trips to the lake near my house. Unfortunatly there is a 10 HP limit. So it is trolling motor only there.

So Anyway. I took my son out one evening and we found some shade and did a little cat fishing. Only caught one but had a good time.
That trip started as a day to work on my rebuild. I was going to unload the boat and add the guides and bunks on. Unfortunatly I forgot a handsaw so I only got a set of guides on. So we ended up fishing into the dark. When I went to load all went ok until I went to pull out. Since my son is learning and he was being helped by a couple of guys that were just there fishing. We missed that I had placed my guides to far back. So as I pulled out my pontoon was sitting on top of one of the guides. It ended up breaking the guide and I had to lift the pontoon and remove the guide from under the log. .... Not how I expected things to work.
It was my fault. But I fortunately didn't tear a hole in the log ... just a small dent. It honestly looked worse when I took the pics. I'll post those pics soon.

Fast forward to last weekend same lake. We go across the lake from the ramp. In a large cove. Fish for a while. Then headed out realize the ind had picked up a lot. Like whitecaps. No way my 74 lbs thrust trolling motor was getting us there. No problem I'll just fire up the motor and idle across. Surely they wouldn't ticket us for something like that. I go back and sit down... No Keys! In the mass confusion of having kids fighting during the whole start of the trip and loading I totally forgot. A first for me even on that lake...

So luckily we were near the state campground ramp and we trolled over with the electric and let the wind push us up to the doc. Asked a guy for a ride. Brought my truck and trailer over a loaded from that side which was much windier than the side we started on. I probably should have just grabbed the keys and motored over. But I ended up loading on the windy side with the help of some nice people that had just came down to fish....

So it is always an adventure it seems.

I did try out my front deck seats. And while my deck is soft there I really do like them up there. I almost think they may be a bit heavy but I like them.

I need to figure out how to mount my 10 hp tiller steer on there so I can use it at that lake.

Going to start the tear down soon I hope. Work is kind of busy though. But seems to be settling down. I do have to go out of town at the end of the month though... Headed to Houston for a training thing.

_________________
My rebuild thread.
viewtopic.php?f=16&t=24807


Top
 Profile E-mail  
 
 Post subject: Re: 1988 Harris Pontoon Rebuild --- Pontoonstuff.com
PostPosted: Mon Oct 23, 2017 11:54 am 
Offline

Joined: Wed May 10, 2017 10:23 am
Posts: 236
Location: Cincinnati Ohio
See I spoke too soon. Still in busy mode. Daughters car needed a new convertible top done. I'm convinced the pontoon rebuild would have been easier....


Still trying to get setup so I can start.... I'll take a bunch of video/pics when I start...

_________________
My rebuild thread.
viewtopic.php?f=16&t=24807


Top
 Profile E-mail  
 
 Post subject: Re: 1988 Harris Pontoon Rebuild --- Pontoonstuff.com
PostPosted: Mon Dec 04, 2017 12:25 pm 
Offline

Joined: Tue Nov 01, 2016 4:10 pm
Posts: 15
Stopped in to see how it was going, I know what busy is :lol3

Hopefully will look at a'toon this weekend

Good luck


Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2

All times are UTC - 7 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
© 2009 Pontoonforums.com - Powered by phpBB