Page 1 of 1
New member, first boat, first boat rebuild!
Posted: Sun May 10, 2015 5:07 pm
by Barry
Hi everybody. We got this boat a couple of years ago. We knew the floor had some soft spots in it when we got it. But, we figured we would fix it over that winter. Well, then we bought a house, and had to remodel it, and just general life getting in the way, here it is two years later! But, now the boat is home and ready for the remodel. Its an 18' Bass Buggy with a 40 house Evinrude. Cant remember for sure but thinking the boat, motor, and trailer are all 88 models. The plan is to tear it down to the bare toons, redeck it, carpet, new furniture, new wiring harness, new lights, everything. Ive never done a boat before, so this could get exciting! Looking to learn a lot here.

Re: New member, first boat, first boat rebuild!
Posted: Sun May 10, 2015 7:21 pm
by RcgTexas
Welcome! If you have questions someone will have answers.
There are several rebuilds posted here. I have one, It can be fun, some hard work and very satisfying when complete.
Re: New member, first boat, first boat rebuild!
Posted: Sun May 10, 2015 8:54 pm
by grouser
Welcome,,looks like quite a horn ya got there,,how about a wav file of it?
Re: New member, first boat, first boat rebuild!
Posted: Mon May 11, 2015 2:41 am
by Barry
Ya, its an air horn that plays Dixie. Not sure if it will be there after the rebuild or not.
Re: New member, first boat, first boat rebuild!
Posted: Sun Mar 27, 2016 11:07 am
by Barry
Re: New member, first boat, first boat rebuild!
Posted: Sun Mar 27, 2016 4:20 pm
by Bamaman
Be sure to use the proper mastic for the job and roll the carpet down with a 100 lb. flooring (tile) roller.
Re: New member, first boat, first boat rebuild!
Posted: Sun Mar 27, 2016 5:27 pm
by curtiscapk
nice!
Re: New member, first boat, first boat rebuild!
Posted: Sun Mar 27, 2016 7:00 pm
by Barry
I got the glue from PS. Its what came in the kit, with the glue, carpet, risers, ect. And definitely on the roller!
Re: New member, first boat, first boat rebuild!
Posted: Thu Apr 28, 2016 2:53 am
by Barry
Seats are in and ready to be installed. Also got the glove box for the helm, the new captains seat mount, still waiting on the new captains seat (back ordered).