Finally got the lift in!

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Message
Author
djmodifyd
Posts: 47
Joined: Mon May 09, 2016 3:59 am

Re: Finally got the lift in!

#16 Post by djmodifyd » Fri Jun 24, 2016 7:25 am

Goudax3 wrote:We put our cover on/off when the boat goes in or out. We just got a new vertical lift a couple weeks ago. New boat that was to heavy for our old cantilever lift. Had to have a power winch as well! We are lucky in that we do not have to take the lift and dock out for winter. We are on a empoundment that gets the water level dropped in winter. Bad thing is that we have wild rice and are limited in how much we can clear our shoreline. Looks like a nice lift, have not seen that brand where we are.
Yours looks nice as well! I'm leaning towards covering when rain is on the way, otherwise leave it in covered.

DAKA is local here in Minnesota!

djmodifyd
Posts: 47
Joined: Mon May 09, 2016 3:59 am

Re: Finally got the lift in!

#17 Post by djmodifyd » Fri Jun 24, 2016 7:25 am

crookedlaker wrote:my lift set up is similar and i do not cover my boat
The cover is folded up under my bed
the boat stays pretty clean, i do try to 303 the seats every month or so
I am on a channel that has a good water flow year round so i do not have to move my lifts in the
winter. even my docks stay in year round, at most i get 1" of ice


mike
Ok thanks.

I'm jealous, I wish I could leave mine in!

User avatar
zoom650
Posts: 659
Joined: Mon Feb 10, 2014 7:14 pm
Location: Macon, Panama City Beach

Re: Finally got the lift in!

#18 Post by zoom650 » Fri Jun 24, 2016 9:23 am

Now, it that was mine, I'd be a happy boater.
Michael and Laura
'12 Ford F150 Lariat SuperCrew Ecoboost
'14 Harris Solstice 220, P3 tritoon, Mercury Verado 150, Enertia 14p.
prior boat: '02 Century 2600CC, twin Yamaha EFI 200's, full instruments.

Goudax3
Posts: 29
Joined: Tue Sep 15, 2015 5:08 am
Location: NW Wisconsin

Re: Finally got the lift in!

#19 Post by Goudax3 » Sat Jun 25, 2016 5:11 am

Those covers are heavy, I doubt I would want to be taking it on and off. Actually I would not ever do that.
Ross
Danbury Flowage/Yellow River, NW Wisconsin
2015 South Bay 520 CR
Evinrude 90 Pontoon series

djmodifyd
Posts: 47
Joined: Mon May 09, 2016 3:59 am

Re: Finally got the lift in!

#20 Post by djmodifyd » Sat Jun 25, 2016 2:19 pm

Goudax3 wrote:Those covers are heavy, I doubt I would want to be taking it on and off. Actually I would not ever do that.

I mean the boat cover not the lift canopy

User avatar
NonHyphenAmerican
Posts: 1383
Joined: Tue Apr 01, 2014 11:39 am
Location: South Central Kansas in Hooterville

Re: Finally got the lift in!

#21 Post by NonHyphenAmerican » Sat Jun 25, 2016 7:19 pm

Sorry for the smart aleck comment, but couldn't resist.

Now that I can look at it without standing on my head, I think it's a nice looking setup.

I hope you enjoy it and get lots of use out of it.
[color=#FF0000][b]22' G3 SunCatcher V22F
Yamaha F-90
Tooning on El Dorado Reservoir[/b][/color]

Goudax3
Posts: 29
Joined: Tue Sep 15, 2015 5:08 am
Location: NW Wisconsin

Re: Finally got the lift in!

#22 Post by Goudax3 » Sun Jun 26, 2016 6:50 am

Oh, my mistake, that makes more sense.
Ross
Danbury Flowage/Yellow River, NW Wisconsin
2015 South Bay 520 CR
Evinrude 90 Pontoon series

djmodifyd
Posts: 47
Joined: Mon May 09, 2016 3:59 am

Re: Finally got the lift in!

#23 Post by djmodifyd » Mon Jun 27, 2016 5:44 pm

NonHyphenAmerican wrote:Sorry for the smart aleck comment, but couldn't resist.

Now that I can look at it without standing on my head, I think it's a nice looking setup.

I hope you enjoy it and get lots of use out of it.
thanks!

Scott1
Posts: 46
Joined: Sun Apr 12, 2015 4:35 am

Re: Finally got the lift in!

#24 Post by Scott1 » Wed Jun 29, 2016 9:45 am

I just got a motored covered lift, I spent big money for one reason, so I don't have to put my boat cover on ever! What a pain that was at midnight when done for the day. I have not seen anyone around here put their boat cover on when they have a covered lift. If set up properly, your boat should tuck up under your cover nice and snug. If your lift reaches its max height and it does not, you may have to adjust your bunks higher if your water level allows it.
2014 Bennington 2375 RCW with Verado 250 Pro and Simon Motorsports ECM upgrade to 325 HP
Tri Toon with ESP package

User avatar
trucky
Posts: 368
Joined: Mon Jun 02, 2014 11:40 am
Location: Lake Greenwood, SC

Re: Finally got the lift in!

#25 Post by trucky » Thu Jun 30, 2016 6:09 am

That's a great looking lift and cover.

Without a visible bow stop how do you know if you're centered on the lift?
07 Bentley 240 Cruise - 115 Mercury EFI Four Stroke

Goudax3
Posts: 29
Joined: Tue Sep 15, 2015 5:08 am
Location: NW Wisconsin

Re: Finally got the lift in!

#26 Post by Goudax3 » Thu Jun 30, 2016 7:43 am

trucky wrote:That's a great looking lift and cover.

Without a visible bow stop how do you know if you're centered on the lift?
If you mean side to side, that is controlled by how the bunks are set. I only have about 3-4 inches of slop side to side. Basically, the boat centers itself and that prevents it from contacting the lift uprights. Front to rear, just get it where you want it and take note of some reference point and either make a mark or commit that location to memory. Based on experience, I recommend a mark!
Ross
Danbury Flowage/Yellow River, NW Wisconsin
2015 South Bay 520 CR
Evinrude 90 Pontoon series

djmodifyd
Posts: 47
Joined: Mon May 09, 2016 3:59 am

Re: Finally got the lift in!

#27 Post by djmodifyd » Thu Jun 30, 2016 3:17 pm

Goudax3 wrote:
trucky wrote:That's a great looking lift and cover.

Without a visible bow stop how do you know if you're centered on the lift?
If you mean side to side, that is controlled by how the bunks are set. I only have about 3-4 inches of slop side to side. Basically, the boat centers itself and that prevents it from contacting the lift uprights. Front to rear, just get it where you want it and take note of some reference point and either make a mark or commit that location to memory. Based on experience, I recommend a mark!

exactly this. When I get about 1/4 the way in the lift, the boat centers itself and starts riding up the bunks. I then go forward until a certain bracket on the starboard side lines up with the helm!

djmodifyd
Posts: 47
Joined: Mon May 09, 2016 3:59 am

Re: Finally got the lift in!

#28 Post by djmodifyd » Thu Jun 30, 2016 3:19 pm

Scott1 wrote:I just got a motored covered lift, I spent big money for one reason, so I don't have to put my boat cover on ever! What a pain that was at midnight when done for the day. I have not seen anyone around here put their boat cover on when they have a covered lift. If set up properly, your boat should tuck up under your cover nice and snug. If your lift reaches its max height and it does not, you may have to adjust your bunks higher if your water level allows it.

thanks for the reply!

Putting the cover on is a pain..especially in the pitch black!

I can tuck it up under the canopy pretty tight, the top rails are under the cover.

I've been putting the boat cover on only when I know its supposed to storm, other than that I leave it uncovered. Its so much easier now! Plus I'm not cringing as my boat is moving around in the waves banging against the dock!

Post Reply