Ski Bar / Tubing bar / Tow bar

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Message
Author
Littlehoe
Posts: 93
Joined: Mon Jun 18, 2012 12:00 pm
Location: Prince Albert, Saskatchewan

Re: Ski Bar / Tubing bar / Tow bar

#16 Post by Littlehoe » Wed May 20, 2015 6:13 pm

ya it uses the same bolt as the engine for the top and then you drill a second hole and mount it there too... 2 bolts through the transom and engine on each side. Then the bar just slides into place....
2014 xcursion x23rfc tri-toon with 2012 115 Yamaha

Littlehoe
Posts: 93
Joined: Mon Jun 18, 2012 12:00 pm
Location: Prince Albert, Saskatchewan

Re: Ski Bar / Tubing bar / Tow bar

#17 Post by Littlehoe » Mon Jun 29, 2015 7:14 pm

Ok, so had a combination of new things on the boat, turbo swing, 13 pitch prop, bungee tow rope, and a new 3 person tube. So needless to say it was like night and day, the turbo swing kept the rope completely out of the water, it didn't hook the wake or anything which I was very impressed with.

Overall with all the changes the boat was like night and day difference. I could control when the tube was out of the wake, and I could crank it around like a v hull and whip the kids into the waves. It was an amazing difference. 2 people on the boat and 3 on the tube and we were still able to hit 25 mph... very happy...
2014 xcursion x23rfc tri-toon with 2012 115 Yamaha

Post Reply