1992 monark 24' rebuild

Post your restoration and rebuild projects here.

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

1992 monark 24' rebuild

#1 Post by Mrtoler » Tue Dec 06, 2011 6:55 pm

I figure I'm close enough to having most of my parts I need, so I might as well start my official rebuild! The boat is a 1992 24' monark, the motor is a 1996 Johnson 112 that I had to have rebuilt. I've had my toon for over a year now but haven't done much to it because rebuilding the motor took up my seat money and then some. My plan is change my current layout to a fishing layout, I going to have fishing seats in all four corners but still retain all my couches and sun deck in between. I'm gonna use a double bimini but it will be mounted so it dosent interfear with casting from the front and rear fishing stations! I plan on using vinyl flooring and building a raised helm stand for a better view for the captian. I'm changing all lights to led and adding led rope lights around the furniture. Some of this I've done as I've had the boat for over a year but I'm gonna start from the beginning! Here she is the day I got her and cleaned her up the best I can!

Image

Image

The interior dosent look as good anymore, when I did my first cleaning I used ALOT of bleach not knowing it would ruin them, plus after the motor blew I was pretty mad and it sat in the Texas sun for a long time uncovered.

Image

Image

You can see the difference in carpet color where it's faded over the years. It's also really thin you can see the backing in a few spots

Image

Here is a pic of the motor running after the rebuild and the trolling motor I got shortly after

Image

Image

Image
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#2 Post by Mrtoler » Tue Dec 06, 2011 6:56 pm

I did a little updating to the outside first as it's alot cheaper than new seats! The old graphics where fading and missing in some spots and I had finally ordered my new double bimini that was red so the original color wasn't going to work here's the progress! Stripped the graphics and sanded smooth

Image

Image

I masked all the rails with tape

Image

Then primed

Image

After a few coats of primer the paint went on

Image

I parked it in the yard and let the Texas sun go to work

Image

Next I installed the double bimini

Image

Then the led anchor and navigation lights went on

Image

Image

Then I added the graphics that I did for my grandpaw, he wanted me to name my son after him but we didn't so I did the next best thing and named the toon after him, he thought this was great!!

Image

Here is a pic with him sitting with me on one of our cruises

Image

Here is a few shots of the toon after the above modification

Image

Image

Image

These where took a few weeks ago, I cleaned the toons with coil cleaner and scrubbed them with a SOS pad they are not done but look alot better than they did

Image

Image
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#3 Post by Mrtoler » Tue Dec 06, 2011 6:59 pm

Ok I've started on the interior but it's gonna be awhile before it's done! Here is a pic of my fishing seats I got in awhile back, I set one up there to get a pic and to see how the red stripe looked

Image

Image

Now the fun starts, I started stripping the furniture and I couldn't bealive how HEAVY the couches where. All the bases are wood and where waterlogged, the backrest on the front couches where full of water and where so heavy I couldn't lift them until I sat them at a angle and drained the water....I bet I removed 500lbs of furniture

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

My grandpaw has heavy lifting trash pickup at his house so he took care of the old seats

Image
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#4 Post by Mrtoler » Tue Dec 06, 2011 7:02 pm

Here is what I'm wanting to do with my interior, excuse my drawling I'm no artist

Image

Feel free to ask any questions or make any suggestions I'm all ears. I'm going to try and set up my new seats in the garage tomorrow and take a pic I've just been busy lately Christmas shopping! This is where I am now so bear with me!
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#5 Post by Mrtoler » Tue Dec 06, 2011 7:05 pm

I finally got out in the garage and set my seats up to get some pics for y'all here ya go.

Image

Image

Image

I'm still missing two 55" couches, two lean backs and the console
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
STEVEBRENDA
Posts: 906
Joined: Wed Sep 29, 2010 6:08 am
Location: Boat on Table Rock Lake, MO

Re: 1992 monark 24' rebuild

#6 Post by STEVEBRENDA » Wed Dec 07, 2011 6:22 am

Looking Good!! All of the hard work appears to be paying off.
2014 Regency 254
Mercury 250L Verado

I'm not saying let's go kill all the stupid people.. I'm just saying let's remove all the warning labels and let the problem work itself out.

margaritaman
Posts: 6078
Joined: Tue Feb 16, 2010 3:37 pm
Location: Florida

Re: 1992 monark 24' rebuild

#7 Post by margaritaman » Wed Dec 07, 2011 8:47 am

You're doing a great job! Keep us posted with the pictures. :thumbsup
Cruising the salt waters of East Florida.

User avatar
ToonGuy
Posts: 968
Joined: Tue Feb 08, 2011 9:34 am
Location: Lake Wawasee, Northern IN

Re: 1992 monark 24' rebuild

#8 Post by ToonGuy » Wed Dec 07, 2011 9:24 am

You're going to LOVE that captian's recliner!
Just one boat...after another, after another :-)

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#9 Post by Mrtoler » Wed Dec 07, 2011 10:03 am

Thanks guys, My front couches, leanbacks and I changed from a armrest to a corner seat in the front I'm ordering it today. With any luck I'll have my vinyl flooring pretty soon, then all I will need is a console! Toonguy, you right I already love that seat! I wanted to put them in all four corners as fishing chairs but space wouldn't allow, pluse there $400 bucks a pop so counting the captain chair that's 2grand! I saved alot of money getting the small fishing seats!
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
jrolin1
Posts: 400
Joined: Sun Jan 30, 2011 7:42 am
Location: Lexington SC Lake Murray

Re: 1992 monark 24' rebuild

#10 Post by jrolin1 » Wed Dec 07, 2011 11:01 am

It looks great! Where did you get the seats from?

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#11 Post by Mrtoler » Wed Dec 07, 2011 11:19 am

Thanks, all parts where purchased from pontoonstuff.com, the seats themselves are made by WISE, alot of people sell them but I found the best price at pontoonstuff, plus they offer free shipping and no sales tax!!! I couldn't be happier with my seats I think they are great quality and well built seats...I'd buy them again.... :thumbsup
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#12 Post by Mrtoler » Wed Dec 07, 2011 4:26 pm

[quote="Mrtoler"]Thanks guys, My front couches, leanbacks and I changed from a armrest to a corner seat

Dissreguard this I ordered the front seats earlier and I got 2 lean back lounges, 2-55" couches and I'm going to get 2-arm rest from a different vendor because PS dosent offer the ones I want anymore....should be here Monday!! O I also got my vinyl flooring and the glue to install it! :biggrin2 :biggrin2
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#13 Post by Mrtoler » Fri Dec 16, 2011 11:56 am

Here's a little update, I've been stripping the deck this is what I've got done so far

Image

Image

Image

Image

Image

Image
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
Mrtoler
Posts: 802
Joined: Wed Jul 21, 2010 8:58 pm

Re: 1992 monark 24' rebuild

#14 Post by Mrtoler » Fri Dec 30, 2011 5:57 pm

Made some GREAT progress today, got my vinyl floor installed! It's wasn't to hard of a job just makes it alot easier when you've got help. I love this stuff, there is no way I would ever get carpet again, if you fish this is the way to go! This is when we first rooled it out on the deck

Image

Folded the front half back and started spreading the glue

Image

Image

After it was all glued I started rolling away

Image

Image

Here's a few shots of the completed job, it looked great. I only had a few imperfections where I had to plug a hole, but it's not even noticeable unless I show you!

Image

Image

Image

Image

I'm more than happy with the way it turned out, I would definitely recommend this!
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas

User avatar
ROLAND
Posts: 4248
Joined: Sat Oct 03, 2009 4:29 am

Re: 1992 monark 24' rebuild

#15 Post by ROLAND » Fri Dec 30, 2011 11:41 pm

Ryan, that vinyl decking looks absolutely GREAT!!!!! You did a heck of a job.... And I agree with you, for those of us who fish off our toons, vinyl is the best way to go....I have it on my toon and love it.. keep the pics coming... it looks great!
Roland & Jo
2010 Bennington 20 Sfi
Yamaha 75 4 Stroke
Shreveport, Louisiana

Post Reply