NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Moderators: Redneck_Randy, badmoonrising, lakerunner
NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Hey all,
First and foremost, I want to thank all you guys out there helping each other with your Sharkhide projects. As time goes on, I have less and less time to drop in on the forum to answer questions and every little bit of help is always welcome.
The reason for my post today is I was contacted by the editor of Boating World Magazine and they want to do a story on Sharkhide products.
He said if I can, find a boat owner that's used the products (Cleaner and Metal Protectant) and fully documented the process with lots of pictures. If the Pic's are good and the process is spelled out in detail he'd consider useing that in the article instead of me sending in the info.
Well as soon as he said that I thought of you guys here on the forum.
If any of you fit the bill, give me a ring and we can go over the details.
Hope to hear from you all soon.
Clint Bland
Flatwater Inc
618-624-4091
First and foremost, I want to thank all you guys out there helping each other with your Sharkhide projects. As time goes on, I have less and less time to drop in on the forum to answer questions and every little bit of help is always welcome.
The reason for my post today is I was contacted by the editor of Boating World Magazine and they want to do a story on Sharkhide products.
He said if I can, find a boat owner that's used the products (Cleaner and Metal Protectant) and fully documented the process with lots of pictures. If the Pic's are good and the process is spelled out in detail he'd consider useing that in the article instead of me sending in the info.
Well as soon as he said that I thought of you guys here on the forum.
If any of you fit the bill, give me a ring and we can go over the details.
Hope to hear from you all soon.
Clint Bland
Flatwater Inc
618-624-4091
- curtiscapk
- Posts: 5401
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Clint use Bryan's!!!!!!!!!!!!!!!!!!
Then they can do a side article on ez-fenders!!!
Then they can do a side article on ez-fenders!!!
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
Re: NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
sharkhide did this 1987 toon.
- Attachments
-
- DSC01165.JPG (474.9 KiB) Viewed 1592 times
-
- new toon 2.jpg (62.19 KiB) Viewed 1593 times
-
- new toon 1 side.jpg (71.56 KiB) Viewed 1592 times
30ft party barge,225 black max,tritoon- north alabama- my faster ride 572cu alky inj mopar
Re: NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Bryan did a nice write up and took pictures along the way. I am going to order my Sharkhide products next week to do my '07 South Bay 925. Was going to do it last year, but put it off until this month. I bet Bryan's step by step write up will help you. If there are any particular steps you want more pictures of, or details of, I'll be happy to help over the next couple of weeks as I plan to do mine. I look forward to trying your products and hope to have the results others have achieved. I've been wanting to do this since I bought the boat in 2010. This month, it will happen.
2007 South Bay 925 Tri-toon
5.7 Volvo I/O
Tow Vehicle: Toyota Tundra, 1794 Edition
5.7 Volvo I/O
Tow Vehicle: Toyota Tundra, 1794 Edition
- evinrude2stroke
- Posts: 812
- Joined: Wed Jul 22, 2009 9:08 am
- Location: Mahopac, NY
Re: NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Hey Wedge542, that looks great. I also like the graphics on the fence. Is that painted on or vinyl?
Dave
2016 Manitou 20' w/ 90 E-Tec Pontoon Series
2016 Manitou 20' w/ 90 E-Tec Pontoon Series
Re: NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Its a vinyl wrap guys at a sign shop put on for me, i sent a scetch of what i wanted and they did the rest, 2 days to prep and install and seal edges .I wish when i started polishing mine it was under 10 yrs old, woulda been a snap but when they get old as this little more intense to make em shine at this level, i bet ive told hundreds on our lake what to use, im thinking about getting a sign made just saying done with sharkhide products so im not chased down people waving and flaging at us to stop.
30ft party barge,225 black max,tritoon- north alabama- my faster ride 572cu alky inj mopar
-
- Posts: 1872
- Joined: Wed Nov 12, 2008 6:28 am
- Location: Iowa/Lake of the Ozarks, Mo.
- Contact:
Re: NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Thanks! I was contacted by Pontoon and Deckboat magazine to help them do a polishing article, but after sending them pics, they said the resolution is too low to be able to use. Bummer!!! I'm not gonna do it all over again, just to take pics!!!woolznaz wrote:Bryan did a nice write up and took pictures along the way. I am going to order my Sharkhide products next week to do my '07 South Bay 925. Was going to do it last year, but put it off until this month. I bet Bryan's step by step write up will help you. If there are any particular steps you want more pictures of, or details of, I'll be happy to help over the next couple of weeks as I plan to do mine. I look forward to trying your products and hope to have the results others have achieved. I've been wanting to do this since I bought the boat in 2010. This month, it will happen.
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
-
- Posts: 1872
- Joined: Wed Nov 12, 2008 6:28 am
- Location: Iowa/Lake of the Ozarks, Mo.
- Contact:
Re: NEED HELP FOR SHARKHIDE MAGAZINE ARTICLE
Wedge... That baby looks like its Chrome Plated... I love that you polished the rails and side filler panels. Looks fantastic!
Awesome job!
Awesome job!
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
-
- Posts: 6078
- Joined: Tue Feb 16, 2010 3:37 pm
- Location: Florida