Page 1 of 1
What size hub/spline is my steering wheel?
Posted: Wed May 27, 2009 1:36 pm
by kyle01
2007 misty harbor. looking to replace my wheel but see that there is a bunch of
different options. any easy way to tell?
thanks
kyle
Re: What size hub/spline is my steering wheel?
Posted: Thu May 28, 2009 10:10 pm
by FloterBoter
pull it and look?
that's how i measured mine.
or call a dealer?
Re: What size hub/spline is my steering wheel?
Posted: Fri May 29, 2009 1:19 pm
by kyle01
good luck calling the dealer, they were less than helpful. i'd pull it off, but
it's 250 miles away. i was trying to figure it out so i could pick up a wheel
here and bring it up with me.
if all else fails, i'll just pull it next time i'm up and get a wheel later.
Re: What size hub/spline is my steering wheel?
Posted: Fri May 29, 2009 9:03 pm
by FloterBoter
ask misty harbor?
Email:
mistyharbor@frontiernet.net
Phone: (515) 573-1093
Re: What size hub/spline is my steering wheel?
Posted: Sat May 30, 2009 5:52 am
by badmoonrising
It's a pretty good chance the steering mechanisim is made by Teleflex. Look under the steering unit to confirm this. They could help you better than anyone if it's made by them.
Re: What size hub/spline is my steering wheel?
Posted: Sat May 30, 2009 7:11 pm
by mikeherb
BMR is right on as usual. It may not have a spline at all, but a key insert with a beveled hub (I have no idea if I'm using the right terminology here). My 1980 VIP had that configuration and I was able to order a wheel from Overton's.