Page 1 of 1

Master switch problem

Posted: Sun May 08, 2016 7:53 am
by Gonefishing
Switch problem
My toon has switches like all the other ones out there. I have a master switch problem is sometime it will work and sometimes it will not. I have tried checking the wire at the switch and it seems to have a good connection. Any suggestions on what and how I can check the problem further without taking the toon into a service shop?

Thanks for any help

Re: Master switch problem

Posted: Sun May 08, 2016 5:49 pm
by Griggs
If you have a multi-meter, disconnect the wires to the switch and test for continuity. This will at least verify the internals of the switch are okay. It sounds like you may have a bad master switch.