Page 1 of 1
Aluminum Brightner
Posted: Mon May 23, 2016 3:13 pm
by tapleytown
I tried the aluminum Brightner and followed manufactures directions undiluted. it foamed and I rinsed within 20 sec. Test area turned white... Any suggestions?
Re: Aluminum Brightner
Posted: Mon May 23, 2016 4:44 pm
by sunedog
Acid washes turn the toons white....temporarily. They will return to the normal dull gray gradually.
Re: Aluminum Brightner
Posted: Mon May 23, 2016 5:57 pm
by Bamaman
To make the toons look good, you'll have to polish them. I bought a bottle of White Diamond metal polish today at Advance Auto Parts, and will be pulling my boat (out of the boathouse) and putting it on the trailer. I need to change the lower unit grease anyway.
Re: Aluminum Brightner
Posted: Tue May 24, 2016 6:26 am
by tapleytown
Thanks, that white made me pause. After reading some of the posts I am going to dilute the product and try again. Would really like to get the water stains off. It stays in a slip so I have a lot of algae and the stains
Re: Aluminum Brightner
Posted: Tue May 24, 2016 11:11 am
by Soonertoon
Put it on full strength, coat the hell out of it, wait about 3 minutes and POWER WASH off. It will turn white but only temporarily.