Pontoon Boat & Deck Boat Forum

My 2000 Johnson manual shows fogging the motor through a convenient schrader port on the primer. Problem is I couldn't find any cans with the correct hose. I looked at all the local auto parts stores & also at Bass Pro but all I found were skinny little straws on cans.

Does anyone still package fogging oil this way and do I have to go to a marina to buy it?

I don't know if there is one in your area, but if there is a repair shop specializing in Johnson/Evinrude, give them a call. They may be able to help.


I know I've seen them but I can't remember where. It may have been West Marine.

Try these guys.

http://www.marineengineparts.com/evinru ... g-oil.html

They mention an injector valve at the bottom of the page. I think this is what you need.

Well that link and a little help from Google and I found there is an adaptor available for use on other cans of fogging oil.
http://www.marineengineparts.com/evinru ... embly.html

[img]http://www.marineengineparts.com/media/ ... 763644.jpg[/img]

Oh I keep forgetting that BB code doesn't work here. Is that a permanent problem or will links and formatting work again some day?

Well there you go Guy. Good luck.

Try this:

http://www.marineengineparts.com/winter ... -stor.html

or

http://www.marineengineparts.com/winter ... g-oil.html