Old motor question...
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
- Posts: 97
- Joined: Tue Jul 04, 2017 10:51 am
Old motor question...
Is there a fairly reliable way to gauge the temperature of an old motor? I'm getting close to the point where I'm gonna need to stick it in the lake to tune the carbs and check for leaks. The motor is a 1972 Evinrude 50 hp. I'm gonna mount a good running 15 hp. off one pontoon "just in case".
1973 Kayot with 1972 Evinrude 50 hp Lark
-
- Posts: 241
- Joined: Wed May 10, 2017 10:23 am
- Location: Cincinnati Ohio
Re: Old motor question...
I'd be interested in this too. I always like to know stuff like this. I think I saw a youtube video of someone adding a temp gauge. I didn't watch it I just saw the title ...might have to look for it again.
My rebuild thread.
http://www.pontoonforums.com/viewtopic.php?f=16&t=24807
http://www.pontoonforums.com/viewtopic.php?f=16&t=24807
Re: Old motor question...
i would suggest this or put your hand into the pea stream or on the cylinder head,,have you changed the pump impeller
https://www.harborfreight.com/infrared- ... 93984.html
https://www.harborfreight.com/infrared- ... 93984.html
If it aint broke your not having enough fun
James & Deb
1988 Riviera Cruiser 15 HP Mariner
05 Silverado Z 71 V8 5.3
James & Deb
1988 Riviera Cruiser 15 HP Mariner
05 Silverado Z 71 V8 5.3
-
- Posts: 97
- Joined: Tue Jul 04, 2017 10:51 am
Re: Old motor question...
[quote="MH Hawker"]i would suggest this or put your hand into the pea stream or on the cylinder head,,have you changed the pump impeller
https://www.harborfreight.com/infrared- ... 93984.html[/quote]as
That infrared is exactly what I was looking for....Thanks
https://www.harborfreight.com/infrared- ... 93984.html[/quote]as
That infrared is exactly what I was looking for....Thanks
1973 Kayot with 1972 Evinrude 50 hp Lark