Horn stopped working.
Moderators: Redneck_Randy, badmoonrising, lakerunner
Horn stopped working.
On the most recent trip out on the water had a great day. Typically as we approach the dock we give a single beep on the horn to let people in the cabin know we're home. Wouldn't you know it, our horn has gone silent. Thinking I'll need to pull the volt meter out and do some chasing to see if there's a short anywhere. Anything you knowledgeable folks can suggest that I should ensure to check?
Pinawa Bay, Manitoba
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
- curtiscapk
- Posts: 5401
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: Horn stopped working.
horns go out quick, on my 3rtd one in 4 years! Unhook it and wire directly to the battery if it works that way it's you switch or wires.... Got mine at PS.
18$ with discount.
https://www.pontoonstuff.com/collection ... -boat-horn
18$ with discount.
https://www.pontoonstuff.com/collection ... -boat-horn
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
Re: Horn stopped working.
Sound advise,, ha ha... Yeah check the horn for sure first before all that trouble of chasing wires. Good chance it is the horn . Pitch it, get a new one. 30 minute job.
Re: Horn stopped working.
Thanks all for the heads up. That sounds like the smart play for sure.
Pinawa Bay, Manitoba
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
Re: Horn stopped working.
There may be an adjustment screw on the horn that needs turned a few turns in or out and then back to the original spot.
2020 Bennington 23 SSRXP Mercury 250 Pro XS
www.mtboats.com - Links to all types of powerboat resources
www.mtboats.com - Links to all types of powerboat resources
Re: Horn stopped working.
I just installed this high/low Hella set of horns. I was tired of the meep-meep of the stock horn. I only use the horn in an emergency, so the weak horn was useless. This pair sounds like a freight train, especially reverberating off the log and underskinning. My wife was coming up the rear ladder and I thought I'd give these a try up front, scared her so much she fell back into the water. (I only get to do that once apparently)
Cost me $32 on Amazon and a few lengths of scrap wire and connectors.
If you want my old horn (pictured in the foreground), I think I still have it and will send it to you for the shipping cost.
https://www.amazon.com/HELLA-003399801- ... B000CRZXPI
Cost me $32 on Amazon and a few lengths of scrap wire and connectors.
If you want my old horn (pictured in the foreground), I think I still have it and will send it to you for the shipping cost.
https://www.amazon.com/HELLA-003399801- ... B000CRZXPI
- Attachments
-
- IMG_6737.JPG (124.81 KiB) Viewed 4833 times
Re: Horn stopped working.
Mine quit this season & when I pressed the switch it made a little "dink dink" sound. Did same with new horn. I had 12V at the terminals with the horn disconnected but only 4V when hooked up. Traced problem to bad ground splice in console. Very crappy wiring in there. I plan to re-wire with a decent blade fuse panel & bussbars to get rid of all the cheap crimps & Scotchlock splices. Those things don't belong on a boat.
Mark
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI
Re: Horn stopped working.
[quote="guy48065"]..... Scotchlock splices. Those things don't belong on a boat.[/quote]
They don't belong on anything, IMO.
They don't belong on anything, IMO.
2014 Benny (Until I find a replacement for my totaled JC Tritoon)
Usually somewhere on the TN River
Usually somewhere on the TN River
- NonHyphenAmerican
- Posts: 1379
- Joined: Tue Apr 01, 2014 11:39 am
- Location: South Central Kansas in Hooterville
Re: Horn stopped working.
If ya'll weren't so "Horny", they'd last longer!
[color=#FF0000][b]22' G3 SunCatcher V22F
Yamaha F-90
Tooning on El Dorado Reservoir[/b][/color]
Yamaha F-90
Tooning on El Dorado Reservoir[/b][/color]
Re: Horn stopped working.
Update: Took the old horn off and tested it on another battery as suggested here. YUP. Not a wiring issue. Just need a new horn. As luck would have it, the dealer had two of the same make/model in on special order that were never picked up. Took both of them cheap. Just had to splice in my current connector!
Thanks for the great advice all!
Thanks for the great advice all!
Pinawa Bay, Manitoba
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC