Battery switch ring connectors
Moderators: Redneck_Randy, badmoonrising, lakerunner
Battery switch ring connectors
Is there a standard size for ring connectors to be used with a battery switch? Boat is winterized an hour away and not available for checking. Thanks in advance.
Pinawa Bay, Manitoba
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
2014 Premier Cast-a-way 231, PTX; 2014 Evinrude 250HO ETEC
- FLOUNDERPOUNDER225
- Posts: 314
- Joined: Thu Jul 16, 2015 7:19 am
Re: Battery switch ring connectors
the studs on the switch are either 5/16 or 3/8, probably 3/8 If I had to take a guess. The wire size is probably #2. make sure you use heat shrink over the wire crimp area and some dielectric grease after crimping them. if you can tin them and solder them in even better.
http://www.genuinedealz.com/solder-slug ... r-terminal
http://www.genuinedealz.com/solder-slug ... r-terminal
Pensacola FL
2015 Berkshire 231 RFC
Yamaha F-150
2015 Berkshire 231 RFC
Yamaha F-150