Need help

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
Gonefishing
Posts: 637
Joined: Wed Nov 14, 2012 5:56 pm

Need help

#1 Post by Gonefishing » Sat May 12, 2018 2:58 pm

Sorry tried to edit my post but couldn’t. Problem is I have switches for the running lights anchor lights bait tank. Also have a master switch that needs to be turned on prior to others being used. The master switch is not working. Check fuse okay. Any suggestions?
Bob Jacksonville, Nc

2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch

User avatar
bansil
Posts: 1103
Joined: Tue Nov 01, 2016 4:10 pm
Location: Watâ'gi lake...Beautiful Waters

Re: Need help

#2 Post by bansil » Sat May 12, 2018 4:13 pm

Do you have a multi meter?
Simple wiring is battery to master switch to fuse block.

So can you check main switch? 12v or continuity, and make sure work
.ugh..switch it on and off continuity should go blank on meter to zero when moved this will check switch.

Also with multimeter on 12v dc, with switch off 12v one side nothing, otherside, flip switch 12v both sides

Also check ground from batety to ground block, okay?

I have had a few adult beverages....so just looking for answers :lol3
Check out "Dudes" site www.whereisdude.com

User avatar
NonHyphenAmerican
Posts: 1379
Joined: Tue Apr 01, 2014 11:39 am
Location: South Central Kansas in Hooterville

Re: Need help

#3 Post by NonHyphenAmerican » Sat May 12, 2018 8:57 pm

Disconnect the battery, clean terminals, re-connect.
[color=#FF0000][b]22' G3 SunCatcher V22F
Yamaha F-90
Tooning on El Dorado Reservoir[/b][/color]

Gonefishing
Posts: 637
Joined: Wed Nov 14, 2012 5:56 pm

Re: Need help

#4 Post by Gonefishing » Mon May 14, 2018 9:02 am

Update tho is what I like about this group. Asked a question have a problem someone on here knows the answer. Thanks to all I did what was suggested and the problem has been fixed. Cleans the cables on batteries problem solved. Thanks again guys saved me money and weeks of down time on the toon. Thanks again
Bob Jacksonville, Nc

2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch

User avatar
curtiscapk
Posts: 5393
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: Need help

#5 Post by curtiscapk » Mon May 14, 2018 9:06 am

:nana :nana :nana :nana :nana :thumbsup :thumbsup :thumbsup :thumbsup :thumbsup :coffee
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

User avatar
bansil
Posts: 1103
Joined: Tue Nov 01, 2016 4:10 pm
Location: Watâ'gi lake...Beautiful Waters

Re: Need help

#6 Post by bansil » Mon May 14, 2018 9:17 am

Good to hear :smoke
Check out "Dudes" site www.whereisdude.com

Post Reply