Anyone have a dock like this & can tell me what's the trick to hooking them together? The plastic decking is flush to the front of the frame & the gap is too tight for the hook to angle in.
Roll-in dock hook-together sections
Moderators: Redneck_Randy, badmoonrising, lakerunner
Roll-in dock hook-together sections
- Attachments
-
- Screenshot_20240522_104554_Gallery.jpg (1.06 MiB) Viewed 5792 times
-
- Screenshot_20240522_104532_Gallery.jpg (1.17 MiB) Viewed 5792 times
Mark
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI
- curtiscapk
- Posts: 5412
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: Roll-in dock hook-together sections
never seen those before...
Sorry.
Sorry.
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
Re: Roll-in dock hook-together sections
Do you have to roll one part in first, then when it's kinda flat roll the other part in so the bar drops under the C?
2019 G3 SunCatcher V322 SS tritoon, Yamaha F200
2019 F-150 XLT SuperCrew FX4, 3.5L EcoBoost Max Trailer Tow Package
2019 F-150 XLT SuperCrew FX4, 3.5L EcoBoost Max Trailer Tow Package
Re: Roll-in dock hook-together sections
I had to resort to paying the guy who's been installing & removing this dock in recent years.
He made it look easy--but he did remove the bolts holding the end of the decking down so the hook would fall over the metal frame without being blocked by the plastic.
I'll probably handle this in the future.
I also find I don't need 80 feet of dock for my pontoon. Maybe a deep-V would but I'm just fine tying off to the 60 foot section.
He made it look easy--but he did remove the bolts holding the end of the decking down so the hook would fall over the metal frame without being blocked by the plastic.
I'll probably handle this in the future.
I also find I don't need 80 feet of dock for my pontoon. Maybe a deep-V would but I'm just fine tying off to the 60 foot section.
- Attachments
-
- IMG_20240525_001653.jpg (903.41 KiB) Viewed 5748 times
Mark
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI
1996 Sweetwater 180EX + Johnson 40
Rush Lake, Atlanta, MI