Page 1 of 1
Adding a USB port for mp3 player
Posted: Tue Apr 20, 2010 9:55 pm
by captain kurt
Has anyone ever added a USB port into there existing toon stereo system ? Help

Re: Adding a USB port for mp3 player
Posted: Wed Apr 21, 2010 7:14 am
by pepper1126
Look at the back of your CD player and see what kind of inputs you have and then go find a cord that has two outputs that will fit into your CD player and the other end has a input for a USB or go buy a new CD player with a USB
Re: Adding a USB port for mp3 player
Posted: Wed Apr 21, 2010 8:38 am
by WaltF
Good question....
A USB port has to have a power 'leg' to supply power to the memory stick.
One thing i did have was a little docking station for a USB memory stick. It was battery powered so it didnt need power from the radio, and I connected it to the radio with the external audio input. Worked pretty good.

Re: Adding a USB port for mp3 player
Posted: Wed Apr 21, 2010 8:46 am
by Bamby
You could try one of these, but I have no experience with them as to how they work.
http://www.amazon.com/exec/obidos/ASIN/ ... biz2000-20
If you radio has auxiliary ports you could also try this.
http://www.ehow.com/how_6003331_add-usb ... tereo.html
Re: Adding a USB port for mp3 player
Posted: Wed Apr 21, 2010 10:25 am
by GXPWeasel
Most newer aftermarked stereos have an auxilary input on them, either on the front face, or the back. If not, I'd just go buy one for $100 that does, and use that. The cable that goes from an iPod to a CD deck is about $16 at Best Buy.
Re: Adding a USB port for mp3 player
Posted: Wed Apr 21, 2010 10:28 am
by WaltF
Thats what im talking about Bamby.
