Knots - Hitches - Bends; commonly used on a pontoon

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
User avatar
Stephen
Posts: 138
Joined: Wed Apr 07, 2010 8:43 am
Location: Wichita Falls, Texas

Knots - Hitches - Bends; commonly used on a pontoon

#1 Post by Stephen » Tue May 11, 2010 8:32 am

I did a search and didn't find any threads that covered this topic.

I went to the mountains yesterday and took my friend's knot book with me. Read through it and memorized a few knots (mainly hitches like the half hitch, timber hitch and clove hitch). I thought they'd be helpful on the boat, but realized as I played with them that they weren't really what I needed. So, what I'm asking is that you guys tell me what some of the most important knots, hitches and bends are to know on a pontoon boat. Knots for tying up to a dock, for throwing over a poll at the dock to pull in, bends for tying rope together... etc. Post up anything and everything you use regularly and what you use it for, and I'll memorize the knots.

One of the main things I want to be able to do is know how to have a knot ready to moor quickly when I'm by myself or with my wife.

As always, the help is much appreciated.
Stephen & Gina
"It's Aboat Time"
2007 Godfrey Sweetwater Tuscany Series, 21'
2002 GMC Sierra 1500
Lake Arrowhead, TX

"Work is hard. Distractions are plentiful. And time is short."
-Adam Hochschild

dockholiday
Posts: 2916
Joined: Thu Nov 06, 2008 7:32 pm
Location: Lake Oconee, Ga.

Re: Knots - Hitches - Bends; commonly used on a pontoon

#2 Post by dockholiday » Tue May 11, 2010 9:44 am

I mainly use the two half hitches, square knot an bowline. Here are a few just click on the photo an it will walk you through it. Lots of different knot for different applications. Learned a bunch in the Boy Scouts.
http://www.animatedknots.com/indexboating.php

User avatar
Bamby
Posts: 1409
Joined: Mon Nov 03, 2008 7:30 am
Location: Near Wheeling W.V.

Re: Knots - Hitches - Bends; commonly used on a pontoon

#3 Post by Bamby » Tue May 11, 2010 9:56 am

Perhaps Grog's Boating Knots http://www.animatedknots.com/indexboating.php may be the best known source out there. Also I find a knot known as the "Truckers Hitch" as an awful handy knot to know, and I often use it with our boat when tying off to shore, camping, etc. This knot can actually do most anything a ratchet binder can do, with a length of rode (marine for rope).

Does your boat have cleats? If it does pre-attach a dock line to it when still adrift away from the dock. Then when you come in all you haft to do is grab the line and fasten it to something secure on the dock.

Have you purchased or have a boat hook yet? A boat hook is another useful tool to have available when your bring the boat in, and sometimes to push yourself out if the dock spaces are tight.
Respect Our Recreational Resources
Leaving Only "The Footprints of Your Passing"

Boating the Muskingum River
1972 35' Crest Pontoon Houseboat
2007 90 hp. Yamaha

User avatar
curtiscapk
Posts: 5393
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: Knots - Hitches - Bends; commonly used on a pontoon

#4 Post by curtiscapk » Tue May 11, 2010 10:06 am

Boat hooks rule!!!
Attachments
100_0636a.jpg
100_0636a.jpg (117.9 KiB) Viewed 2484 times
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

User avatar
HandymanHerb
Site Admin
Posts: 14314
Joined: Fri Mar 17, 2006 8:57 pm
Location: Orlando Fla

Re: Knots - Hitches - Bends; commonly used on a pontoon

#5 Post by HandymanHerb » Tue May 11, 2010 10:26 am

I used the trucker's knot but we called the expediter knot, good for fastening stuff down tight so it doesn't move in shipment, the only differance is we just tie and overhand loop on one end.

You use the loop to pull the line tight and then 2 half hitches will hold it
In Memory of John 6x6 Larsen

Image

User avatar
Stephen
Posts: 138
Joined: Wed Apr 07, 2010 8:43 am
Location: Wichita Falls, Texas

Re: Knots - Hitches - Bends; commonly used on a pontoon

#6 Post by Stephen » Tue May 11, 2010 11:46 am

I do have cleats. 4 in total, one on each corner. Good ideas.

I guess the half hitch works, I just need to do it twice. I'll memorize the bowline, square knot, truckers hitch, and work on getting a boat hook. Links are great, I'll definitely spend some time on those later when I have time.

Thanks!
Stephen & Gina
"It's Aboat Time"
2007 Godfrey Sweetwater Tuscany Series, 21'
2002 GMC Sierra 1500
Lake Arrowhead, TX

"Work is hard. Distractions are plentiful. And time is short."
-Adam Hochschild

User avatar
BassFrequency
Posts: 706
Joined: Tue Feb 16, 2010 3:09 pm
Location: LOTO

Re: Knots - Hitches - Bends; commonly used on a pontoon

#7 Post by BassFrequency » Tue May 11, 2010 12:21 pm

I know a good cleat tie but i'll have to post pics of it as i cant explain it well ( just learned it at my new job :biggrin2 )

best part about it is it doesnt over tighten it self from tension and you can tie it one handed
24' 1989 Starcraft 23.1mph gps
60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back


Image

Post Reply