Page 1 of 1

Mounting a Motorguide

Posted: Sat Aug 07, 2010 3:51 pm
by rotortrash
I just bought a motorguide trolling motor. It has a 60” long shaft and it has 85lbs of thrust, and a wireless remote. I am trying to figure out the best way to mount the Gator mount to the deck of my toon. I don’t have the fishing deck on the front of my toon so I am looking for some ideas. Any help would be appreciated. Thanks!

Re: Mounting a Motorguide

Posted: Sat Aug 07, 2010 5:59 pm
by mike003
newtoon2.jpg
newtoon2.jpg (3.7 KiB) Viewed 3646 times
Sorry, I don't have a better pic. I have the same motor in 55lb. The mounting plate is just inside the front gate. I open the gate to mount the motor, then close it. I have to open the gate to drop it. If you look closely, you can see the motor between the fishing seats.

Re: Mounting a Motorguide

Posted: Sat Aug 07, 2010 6:00 pm
by oldmn19
Some pictures of the frt and rear deck would help! Have to see what you might have as a mounting spot!

Re: Mounting a Motorguide

Posted: Sat Aug 07, 2010 6:07 pm
by dockholiday
Welcome Roto

When you say you don't have a fishing deck, do you mean there is no space outside the railing (fence) or do you mean their are just no fishing chairs outside the rail. Here is one that I recently saw posted here......viewtopic.php?f=2&t=5894&p=39279&hilit= ... tor#p39279
Guess you are wanting a permanent mounting as opposed to just something that can be added when you need it.
Sounds like you will have plenty of power with 85lbs of thrust.
doc

Re: Mounting a Motorguide

Posted: Sat Aug 07, 2010 6:08 pm
by HandymanHerb
I have 2 fishing seats up front inside of the fence, I mounted mine to one side of the gate and use fasteners so I could remove it quick if I wanted to.

Re: Mounting a Motorguide

Posted: Sat Aug 07, 2010 6:11 pm
by mike003
boatscan.jpg
boatscan.jpg (258.89 KiB) Viewed 3641 times
I neglected to get a picture and I can't get to the boat for a few days. If you look at this catalog pic of my boat, you'll see the trolling motor plug by the front gate. The mounting plate is installed right next to the plug.

Re: Mounting a Motorguide

Posted: Sun Aug 08, 2010 11:01 am
by rotortrash
I should have been more specific on what I am dealing with. There is no deck in front of the fence, I am thinking about making some sort of bracket so the trolling motor is on the out side of the fence. I really don’t want the mount mounted between the seats in the front of the boat.

Re: Mounting a Motorguide

Posted: Sun Aug 08, 2010 11:14 am
by ezmuny13
viewtopic.php?f=2&t=5894

here's what i did

Re: Mounting a Motorguide

Posted: Sun Aug 08, 2010 11:44 am
by rotortrash
I am thinking about something similar ezmuny, the only problem is the motor guide mount is a lot bigger. http://www.cabelas.com/p-0036678.shtml

Re: Mounting a Motorguide

Posted: Sun Aug 08, 2010 12:19 pm
by ezmuny13
return it and go with the minn kota............