Page 1 of 1

Carpet adhesive

Posted: Fri Apr 22, 2011 10:48 am
by klyons62
Why can't Overton's carpet adhesive be used with pressure treated plywood? It doesn't make sense to me what's the difference between PT and marine plywood? As far as the adhesive goes.

Re: Carpet adhesive

Posted: Fri Apr 22, 2011 12:00 pm
by jimrs
Chemical Reaction just might be the reason.

Re: Carpet adhesive

Posted: Fri Apr 22, 2011 8:40 pm
by badmoonrising
You shouldn't be using PT plywood anywhere NEAR aluminum anyway...

Re: Carpet adhesive

Posted: Mon Apr 25, 2011 11:28 am
by playcat
Pressure treated plywood uses CCA, which contains copper. Put copper next to aluminum and add water ( especially brackish or salt) and kiss that aluminum goodbye, right where you can't see it. Toss in some stainless screws and you got a nice battery going on!
Galvanic action also destroys wood, so its a lose-lose situation. There are treated plys that do not contain copper that are suitable for marine use, but you won't find them at the big box stores.

Re: Carpet adhesive

Posted: Wed May 18, 2011 5:11 am
by onthewater11
I did not know this was the case, but I would have assumed pressure treated decking would be the way to go. I haven't ever replaced the carpet to see what is underneath, but now I know that I need to do some research before making any changes. I have been thinking about replacing my carpet down with carpet tiles because they are easier to work with and can be adhesive free. This could make them stay in place and easy to replace. We all know that the carpet takes a beating!

Re: Carpet adhesive

Posted: Wed May 18, 2011 7:07 am
by Parasympathetic
I think most here would agree that gluing carpet on a toon is not really needed. The rails hold it down really well and the glue will make it a tremendous PITA to get off the next go around.

Re: Carpet adhesive

Posted: Wed May 18, 2011 7:28 am
by sammtoon
I never knew that PT wood had copper.....I learn something everyday. I have read and read forums and I have alwasy heard people use both (marine or PT). I dont need to replace my floor, but I did replace my carpet last year. I read where some used glue some so HELL no. I used it, It seemed that even when the carpet was stretched you could see bubbles. So I ended up glueing it all down. Oh well.....I know some are gonna say its a bitch to take up, I am sure it will be, but I know it looks good now so thats what matters. I guess, if/when I take it up (years down road) I will be bitching about what I did, and how my back aches but oh well. Thanks for the new knowledge about PT and aluminum!

Re: Carpet adhesive

Posted: Wed May 18, 2011 8:05 am
by GregF
The Wolman plant manager told me using PT on a pontoon was a waste of money. He says PT is mostly to prevent insects, not rot and the mere process of pressure treating plywood might cause more problems than it fixes. (delamination)
He said he would PT any plywood I would bring him but he advised against it.
That was without considering any galvanic action.
I thought it was interesting that he was passing up a sale but I appreciated the honesty from the people who invented pressure treating.