ok..Noobie question about loading

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Message
Author
User avatar
fastbackford
Posts: 40
Joined: Wed Jul 13, 2011 8:19 pm
Location: Volusia County Florida

ok..Noobie question about loading

#1 Post by fastbackford » Thu Jul 14, 2011 7:39 pm

I have a 20' and the trailer has the two full length "V"s where the pontoons rest. Is this a drive on trailer or a float on? I figure it's better to ask here than get out on the ramp and mess up and look like a smacked ass. Thanks for your help.
Government Warning:

Governments are extremely dangerous.
Death, imprisonment, theft of property
and loss of freedom will result from
giving them too much power.

User avatar
kryptonite
Posts: 488
Joined: Fri Mar 04, 2011 7:32 pm
Location: Otter Lake (S. Central IL)

Re: ok..Noobie question about loading

#2 Post by kryptonite » Thu Jul 14, 2011 7:56 pm

That would be a drive-on. Back it in till 2/3 of the bunks are in the water. Then slowly run the boat up the bunks. When you get good at it you can EASE your way up the bunks with the motor. If you're not comfortable with that, just slowly power onto the bunks til you are straight, then use your winch to pull it the rest of the way.

Best to practice on a weekday when the ramp isn't busy. Then you can get a feel for it before you have a crowd watching you.

If you are loading in the windy conditions, you might want some bunk guides to help you out.
2008 22' Tahoe Vista Elite Merc 75hp 4 stroke

User avatar
GregF
Posts: 3323
Joined: Thu Aug 26, 2010 8:47 pm
Location: Estero Florida

Re: ok..Noobie question about loading

#3 Post by GregF » Thu Jul 14, 2011 7:59 pm

This goes a lot better if you have the upright guide ons in the back.

I can load by myself on a windy day with them.
1974 Harris
70 HP 4 stroke EFI Yamaha

User avatar
lakerunner696
Posts: 863
Joined: Fri Dec 12, 2008 10:23 pm
Location: Lake Tenkiller, Oklahoma

Re: ok..Noobie question about loading

#4 Post by lakerunner696 » Thu Jul 14, 2011 9:29 pm

I trailer is set right you can power all the way up with no need to winch.
Loyd, AKA Angry Ol Bastard & Betty Meeks
Beautiful Lake Tenkiller Oklahoma
2008 F150 Lariat Super Crew
2004 Tracker Regency, 2010 Evinrude E-Tec 90
Haul Rite trailer

God bless our country, God damn it's enemy's.

User avatar
ROLAND
Posts: 4248
Joined: Sat Oct 03, 2009 4:29 am

Re: ok..Noobie question about loading

#5 Post by ROLAND » Fri Jul 15, 2011 12:46 am

ahhh, a question near and dear to my heart....when I first got my pontoon a little over a year ago, my biggest fear was launching and loading.... especially the loading part.... now, a year later, I don't freak out when it comes time to load up... One thing I found very helpful for me was adding a set of 48" trailer guides to my trailer... with the guides, I just kinda line up the boat so that i'm only a few inches inside the right guide and it seems to work more times than not...Once I start toward the trailer I just kinda bump my motor into gear from neutral to keep my momentum... normally once I'm about half way or better onto the trailer I give her a little juice and she glides right up to the stops... hook up the strap, trim up the motor and exit the launch.... One big thing I learned early on was don't get nervous just because there are boats waiting to load....like someone else mentioned, if you can go out during the middle of the week when the launches are less busy and get a few practice shots in......I was so frustrated at one point when I first started tooning that I was ready to chunk it all and sell it... but the boys on this forum told me to hang in there... follow thier guidelines and you'll be fine in no time at all...like anything else, the more you do it, the easier it will get.
Roland & Jo
2010 Bennington 20 Sfi
Yamaha 75 4 Stroke
Shreveport, Louisiana

User avatar
fastbackford
Posts: 40
Joined: Wed Jul 13, 2011 8:19 pm
Location: Volusia County Florida

Re: ok..Noobie question about loading

#6 Post by fastbackford » Fri Jul 15, 2011 5:10 am

Great poop guys. Thanks for the 411. I'm grabbing my brother this afternoon after work and take the Looney Tooner out for a couple practice loadings like you guys suggested. I definitely see a set of those guides in my future.
Government Warning:

Governments are extremely dangerous.
Death, imprisonment, theft of property
and loss of freedom will result from
giving them too much power.

devdwt
Posts: 187
Joined: Tue Jul 27, 2010 5:05 pm

Re: ok..Noobie question about loading

#7 Post by devdwt » Fri Jul 15, 2011 5:48 am

Best advice I can give.........EASY does it...... :thumbsup
Don't get in a hurry and if you screw up just back up and try again.
You'll get the hang of it.
2005 Bennington 2275LX
Yamaha 90 Four Stroke

....somewhere on the TN & Little TN River

User avatar
pontchartraintoon
Posts: 108
Joined: Mon Jul 26, 2010 8:19 am
Location: Slidell, LA

Re: ok..Noobie question about loading

#8 Post by pontchartraintoon » Fri Jul 15, 2011 6:23 am

When I was 18, I was a mate on a head boat. I worked for a guy who was about 50 years my senior, and one day he decided to teach me how to dock a 70 foot head boat. He put me behind the wheel, said "there is the slip, don't go any faster than you want to crash into something". I've lived by these words, and have run boats all over the world now. One thing you will notice a lot of times when people are docking, launching or recovering a boat is once they get into a bad situation, they immediately think that a lot of throttle is going to make the situation better. Often times, just the opposite will be true. Good Luck at the ramp, and enjoy the toon!

User avatar
oldmn19
Posts: 1575
Joined: Fri Mar 17, 2006 6:22 pm
Location: N.C.

Re: ok..Noobie question about loading

#9 Post by oldmn19 » Fri Jul 15, 2011 7:12 am

I have found that backing the trailer all the way in to get all of the bunks wet then pulling out till about 3/4 of bunks are in the water works best for me. Practice Practice will do it, enjoy, have fun, don't sweat it. :thumbsup
2005 Tuscany TS2286FC by Sweetwater
22 ft, 90 hp 4s Yamaha
Lorance 332c GPS/Fishfinder
Minnkota copilot Trolling motor
3 battery's, tandem axle trailer pulled by 05 Dodge Quad Cab Hemi 2x2.

User avatar
The_Hellbilly
Posts: 930
Joined: Fri Jul 30, 2010 8:59 am
Location: Lake Eufaula, Oklahoma

Re: ok..Noobie question about loading

#10 Post by The_Hellbilly » Fri Jul 15, 2011 7:23 am

oldmn19 wrote:I have found that backing the trailer all the way in to get all of the bunks wet then pulling out till about 3/4 of bunks are in the water works best for me. Practice Practice will do it, enjoy, have fun, don't sweat it. :thumbsup
:mrgreen: +1........ a little lube never hurts :thumbsup
Counting all the a$$holes in the room Well I'm definitely not alone

2005 Voyager 22ft Tritoon
2004 Honda 135hp
Strakes, underskinned, aluminum deck, etc.
Towed by: '11 Chevy Z71 Crewcab

Red555
Posts: 148
Joined: Sat May 14, 2011 1:13 am

Re: ok..Noobie question about loading

#11 Post by Red555 » Fri Jul 15, 2011 8:51 am

The_Hellbilly wrote:
oldmn19 wrote:I have found that backing the trailer all the way in to get all of the bunks wet then pulling out till about 3/4 of bunks are in the water works best for me. Practice Practice will do it, enjoy, have fun, don't sweat it. :thumbsup
:mrgreen: +1........ a little lube never hurts :thumbsup
That's what she said.

:nana :nana :nana
Mike

20' Sweetwater with a 90hp Yamaha
Northeast Florida (GCS)

User avatar
chill'nthemost
Posts: 1447
Joined: Sat Jun 12, 2010 9:25 pm
Location: Terrebonne,OR

Re: ok..Noobie question about loading

#12 Post by chill'nthemost » Fri Jul 15, 2011 9:00 am

Reading all of this makes me thankful my wife can't back a trailer, but she can sure load our toon, wind or no wind. I've never tried and I don't care if I ever do. When I had carpeted bunks I always dunked them first and them left 2/3 in the water. The plastic bunk caps have made loading that much easier.
1998 Sun Tracker Party Barge 25ft, stern drive 3.0 Chevy
Unfortunate member Parent's of Murdered Children

I love my country, it's the government I fear

User avatar
mike
Site Owner
Posts: 1727
Joined: Thu Feb 02, 2006 5:04 pm
Location: Boise Idaho

Re: ok..Noobie question about loading

#13 Post by mike » Fri Jul 15, 2011 9:02 am

yep, if you power on a bit you dont have the toon sliding back from the front like you do if you float it on! :nana
1999 Voyager 21' Express Fish triple toon 115hp Mercury (SOLD)
2004 Ford F150 SuperCrew
Boise Idaho

dockholiday
Posts: 2916
Joined: Thu Nov 06, 2008 7:32 pm
Location: Lake Oconee, Ga.

Re: ok..Noobie question about loading

#14 Post by dockholiday » Fri Jul 15, 2011 9:18 am

it both.........just depends on how deep your trailer is
doc

User avatar
GregF
Posts: 3323
Joined: Thu Aug 26, 2010 8:47 pm
Location: Estero Florida

Re: ok..Noobie question about loading

#15 Post by GregF » Fri Jul 15, 2011 9:25 am

Just be aware some ramp owners will kick you out and bar you for power loading. It is tough on the end of the ramp. Make sure it is OK before you do it on a strange ramp.
1974 Harris
70 HP 4 stroke EFI Yamaha

Post Reply