Hi All..
I own a 2010 Sylvan toon.. I bought it used in 2012. We use this boat a lot at Lake Havasu in the winter.. We tow it down every year with our motorhome and enjoy it a lot. We also use it for about a month in the summer. We live in Colorado.
The aluminum skin on the fencing had several light creases and dents when I bought it. But in all honestly I have added some and have an area about 2 to 3 feet long that I damaged a couple of years ago when I was pushed into a dock by high winds... This drives me crazy...
Sylvan uses a system to attach it's skin to the frame (the frame is undamaged) that amounts to a slip in that is bent 90 degrees into the frame and adhesive tape to hold it in place..
That really looks like it would be very difficult to replace with this system..
Has anyone used a skin mounted to the outside of the frame and rivet or screw to the frame? What would you use.. Aluminum or a vinyl type material?
This damage drives me nuts.. I like my stuff to look nice..
Any input would be appreciated...
Ron
Fence repairs
Moderators: Redneck_Randy, badmoonrising, lakerunner
Fence repairs
Living at 9200 Feet in Colorado
2010 Sylvan 18 foot Pontoon
It follows our 2004 Travel Supreme 40 foot coach closely.
Working hard at being retired!
2010 Sylvan 18 foot Pontoon
It follows our 2004 Travel Supreme 40 foot coach closely.
Working hard at being retired!
Re: Fence repairs
Hi Again..
Well did a little more research and the material (even heavier) is available on line.. There are sites dedicated to Pontoon Fencing.. Now just have to figure how to do it!
Ron
Well did a little more research and the material (even heavier) is available on line.. There are sites dedicated to Pontoon Fencing.. Now just have to figure how to do it!
Ron
Living at 9200 Feet in Colorado
2010 Sylvan 18 foot Pontoon
It follows our 2004 Travel Supreme 40 foot coach closely.
Working hard at being retired!
2010 Sylvan 18 foot Pontoon
It follows our 2004 Travel Supreme 40 foot coach closely.
Working hard at being retired!
Re: Fence repairs
How did it go? We got ours from the same company. Our fences dont have the slide in so we had to come up with a trim for it. That has been the hardest part, the trim never stays flush with it.
1997 19' Ercoa
-
- Posts: 241
- Joined: Wed May 10, 2017 10:23 am
- Location: Cincinnati Ohio
Re: Fence repairs
If you have any pictures I would be interested. I am planning to re side my pontoon during my rebuild. I've got dents and dings due to all the years of use. And it needs an update.
My rebuild thread.
http://www.pontoonforums.com/viewtopic.php?f=16&t=24807
http://www.pontoonforums.com/viewtopic.php?f=16&t=24807