PVC Poles for new cover

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Message
Author
User avatar
Texoma Toon
Posts: 2675
Joined: Tue Nov 21, 2006 7:35 am
Location: Lake Texoma, Texas

Re: PVC Poles for new cover

#16 Post by Texoma Toon » Sat Jan 28, 2012 2:08 pm

I have seen thses a was wondering the same thing, if they would hold up to heavey rains. I did find a cover with groumets every 18 inches for tie downs so it might work ok.
2007 G3 LX 22 Fish & Cruise
90 Hp Yammy
Dual Axle Trailer

The proud American will go down into Obama's slavery without a fight, beating his chest and proclaiming to the world how free he really is. The world will only snicker. - Pravda

User avatar
GregF
Posts: 3323
Joined: Thu Aug 26, 2010 8:47 pm
Location: Estero Florida

Re: PVC Poles for new cover

#17 Post by GregF » Sat Jan 28, 2012 5:24 pm

The top on my lift is 3/4" gray conduit PVC (RNC). It is schedule 40 but you can get schedule 80 at an electrical supply. That is thicker wall. Both are V/C protected.
I think if I was doing this in snow country I would use EMT (thin wall metal conduit). If you use a 12:12 pitch (45 degree) you could use factory elbows for the bends.

There may be a supplier of fittings for doing this without using electrical parts. Look at green house web sites.

A "trucker" tarp is what you want for the top. They last 10 years in the Florida sun and they are real tough. They are not cheap but you get what you pay for. A real heavy duty silver tarp is next best. Again, price is somewhat of an indicator.
1974 Harris
70 HP 4 stroke EFI Yamaha

Post Reply