adding lifting strakes to my pontoon boat

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Message
Author
reeltime123
Posts: 6
Joined: Sat Nov 28, 2015 7:07 pm

adding lifting strakes to my pontoon boat

#1 Post by reeltime123 » Tue Dec 01, 2015 2:18 pm

Hi, I am new to here but not the boating community, I have a 25' Baja and a 18' bay boat too. I purchased my Pontoon boat from my friend a few years back it is a StarCraft 223 limited. It had 2 toons on it and after taking a few waves over the bow and almost flipping it in the lake when rough weather popped up. " see pictures lol... I wanted to upgrade, So I added a 3rd pontoon and pulled that 115 optimax off of it and picked up a Mercury 225. I am still dialing it in but I am running 45 on a gps so far but the motor height needs to be adjust on the jack plate, the prop needs to be changed and I need to see about adding lifting strakes. Does anyone here know where I can buy them online and order them? or all of them custom made? anyway Just thought I would let everyone see my build and my project in the the works and get a few opinions, it's a little dirty as we were in it all Thanksgiving weekend... Living down in South La. sucks in the summer but it sure is nice the rest of the year. We can boat all year and there is only a month or two that it's too cold!!! :nana :nana
Attachments
1.JPG
1.JPG (158.75 KiB) Viewed 3815 times
2.JPG
2.JPG (130.05 KiB) Viewed 3806 times
3.JPG
3.JPG (137.79 KiB) Viewed 3806 times
4.jpg
4.jpg (151.43 KiB) Viewed 3808 times
5.jpg
5.jpg (115.72 KiB) Viewed 3808 times
6.jpg
6.jpg (150.54 KiB) Viewed 3808 times
7.jpg
7.jpg (153.23 KiB) Viewed 3856 times
Last edited by reeltime123 on Tue Dec 01, 2015 2:47 pm, edited 3 times in total.

reeltime123
Posts: 6
Joined: Sat Nov 28, 2015 7:07 pm

Re: adding lifting strakes to my pontoon boat

#2 Post by reeltime123 » Tue Dec 01, 2015 2:31 pm

:nana :nana

RcgTexas
Posts: 2656
Joined: Wed Jun 18, 2014 6:37 am
Location: Texas

Re: adding lifting strakes to my pontoon boat

#3 Post by RcgTexas » Tue Dec 01, 2015 2:46 pm

Getting a little deep ! :shock:

Oh I forgot Welcome!
1995 beachcomber conversion to tritoon with Honda 135 ,

Link to rebuild [url=http://www.pontoonforums.com/viewtopic.php?f=16&t=19016][Knot Normal][/url]

God Bless America

pond tuuunes
Posts: 496
Joined: Sun Jun 13, 2010 2:27 pm

Re: adding lifting strakes to my pontoon boat

#4 Post by pond tuuunes » Tue Dec 01, 2015 3:40 pm

Wow! Hope nobody got hurt in that deal.
2002 playcraft extreme,26', I/O, 498 ci, 625 hp, 580 ft pounds of torgue, Dart alluminum heads, holly 850 carb, bravo XR drive. GPS 76 mph.

User avatar
cleatus
Posts: 180
Joined: Wed Jan 30, 2013 8:24 am
Location: Upper Chesapeake Bay

Re: adding lifting strakes to my pontoon boat

#5 Post by cleatus » Tue Dec 01, 2015 3:53 pm

Welcome and....DAMN! THAT'S A LOT OF WATER coming in!, bow heavy, move your passengers to the mid or rear in rough water, if you had any kids or pets they would be swept out. I like the guy who didn't get his beer wet. :lol3
here, pull my finger
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2011 Godfrey Sweetwater
Yamaha F70

User avatar
PlaynDoc
Posts: 1600
Joined: Wed Mar 09, 2011 7:32 am
Location: Milner, Georgia

Re: adding lifting strakes to my pontoon boat

#6 Post by PlaynDoc » Tue Dec 01, 2015 4:21 pm

cleatus wrote:Welcome and....DAMN! THAT'S A LOT OF WATER..... I like the guy who didn't get his beer wet. :lol3
yeah, that would be some massive alcohol abuse.
2011 SunChaser DS22
Mercury 115 EFI
13.75 x 15p

User avatar
teecro
Posts: 1028
Joined: Sat Jul 12, 2014 7:23 am
Location: Sunset Bay, TN

Re: adding lifting strakes to my pontoon boat

#7 Post by teecro » Tue Dec 01, 2015 5:04 pm

And yet someone had time to shoot pictures? :roll:
T CRO
2017 Berkshire CTS 24 RFX with Yamaha F150/Simomized 200
2015 Caravelle 16 EBo with Mercury 90

reeltime123
Posts: 6
Joined: Sat Nov 28, 2015 7:07 pm

Re: adding lifting strakes to my pontoon boat

#8 Post by reeltime123 » Tue Dec 01, 2015 5:34 pm

Yea That's my friend Mike he was saving that beer.And was damn proud of it after...My brother just had open heart surgery 3 weeks earlier, and we were just going to take a casual cruise across the lake to a bar on the river, but being from South Louisiana the summertime afternoon monsoons had other plans...My brother had his phone in his hand ready to take pictures because the water went from flat glass to 4 foot seas in a matter of min. The wind was blowing over 40mph and that was enough to make the like like a washtub. The lake is 10 miles wide and never gets deeper than 12 feet

RcgTexas
Posts: 2656
Joined: Wed Jun 18, 2014 6:37 am
Location: Texas

Re: adding lifting strakes to my pontoon boat

#9 Post by RcgTexas » Tue Dec 01, 2015 6:56 pm

I have been thinking about the water coming over the bow. Do you or did you try to trim up to raise the bow, then of course there is the weight in the bow. :donno
1995 beachcomber conversion to tritoon with Honda 135 ,

Link to rebuild [url=http://www.pontoonforums.com/viewtopic.php?f=16&t=19016][Knot Normal][/url]

God Bless America

reeltime123
Posts: 6
Joined: Sat Nov 28, 2015 7:07 pm

Re: adding lifting strakes to my pontoon boat

#10 Post by reeltime123 » Tue Dec 01, 2015 9:45 pm

With 2 pontoons i could never ger the front end up even trimmed up and everybody in the back. The solution was to add the 3rd pontoon.. What a difference that made.. Its like night and day. Just putting the 3rd toon on it I picked up 8 mph and the front end rides high. It handles like a boat now instead of a barge

RcgTexas
Posts: 2656
Joined: Wed Jun 18, 2014 6:37 am
Location: Texas

Re: adding lifting strakes to my pontoon boat

#11 Post by RcgTexas » Wed Dec 02, 2015 7:11 am

:thumbsup

Good luck with the strakes! I hear its difficult to add them on existing logs.
1995 beachcomber conversion to tritoon with Honda 135 ,

Link to rebuild [url=http://www.pontoonforums.com/viewtopic.php?f=16&t=19016][Knot Normal][/url]

God Bless America

Bamaman
Posts: 3679
Joined: Fri May 06, 2011 1:44 pm
Location: NW Alabama--Tennessee River

Re: adding lifting strakes to my pontoon boat

#12 Post by Bamaman » Wed Dec 02, 2015 9:23 am

Bennington's using strakes on their Express center tube--like you've got. And they run just as fast as their full third center tube--but may give a little up in handling.

I would tell you to drop the center toon and have a high quality certified welder add strakes to just it. And I would suggest you find a Bennington and copy their strake design--angles, width, gauge, length.
'12 Bennington 24' SSLX Yamaha 150

TDJ2591
Posts: 360
Joined: Mon Jun 02, 2014 4:33 pm
Location: Smith Lake, AL

Re: adding lifting strakes to my pontoon boat

#13 Post by TDJ2591 » Thu Dec 03, 2015 11:04 am

reeltime123 wrote:Yea That's my friend Mike he was saving that beer.And was damn proud of it after...My brother just had open heart surgery 3 weeks earlier, and we were just going to take a casual cruise across the lake to a bar on the river, but being from South Louisiana the summertime afternoon monsoons had other plans...My brother had his phone in his hand ready to take pictures because the water went from flat glass to 4 foot seas in a matter of min. The wind was blowing over 40mph and that was enough to make the like like a washtub. The lake is 10 miles wide and never gets deeper than 12 feet
Curious. What lake?
[color=#4000FF]2005 Crest Caribbean 25'
2006 Honda 135hp 4 stroke[/color]

TDJ2591
Posts: 360
Joined: Mon Jun 02, 2014 4:33 pm
Location: Smith Lake, AL

Re: adding lifting strakes to my pontoon boat

#14 Post by TDJ2591 » Thu Dec 03, 2015 11:04 am

reeltime123 wrote:Yea That's my friend Mike he was saving that beer.And was damn proud of it after...My brother just had open heart surgery 3 weeks earlier, and we were just going to take a casual cruise across the lake to a bar on the river, but being from South Louisiana the summertime afternoon monsoons had other plans...My brother had his phone in his hand ready to take pictures because the water went from flat glass to 4 foot seas in a matter of min. The wind was blowing over 40mph and that was enough to make the like like a washtub. The lake is 10 miles wide and never gets deeper than 12 feet
Curious. What lake?
[color=#4000FF]2005 Crest Caribbean 25'
2006 Honda 135hp 4 stroke[/color]

reeltime123
Posts: 6
Joined: Sat Nov 28, 2015 7:07 pm

Re: adding lifting strakes to my pontoon boat

#15 Post by reeltime123 » Thu Dec 03, 2015 2:52 pm

Lake Maurepas "see attached picture" in between Baton Rouge and New Orleans. All of the Lake systems connect and you can go all the way to the Gulf in no time... Every year this Lake takes at least 2 people... They try to cross it in bad weather and by the time you get to the middle, it is a washing machine... not a place for a Small boat "or a 2 pontoon boat" if you are not experienced...
Attachments
Lake Maurepas.jpg
Lake Maurepas.jpg (248.64 KiB) Viewed 3432 times

Post Reply