Page 4 of 10

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sat Jun 14, 2014 4:41 pm
by tuned
Wood look vinyl. Nice. Where'd ya find that?

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sat Jun 14, 2014 6:30 pm
by Mrtoler
Thanks, there are several places that sell it. Pontoonspecialist.com sells it along with the weathered grey teak. I got mine from bill on the Salem CL, I also got my other parts from him with the exception of the lil front livewells

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sat Jun 14, 2014 6:42 pm
by Mrtoler
Got the carpet and vinyl off today, I was a job for sure. I had to man handle the vinyl off.

Image

Notice the lack of head room

Image

Image

All off, now I just have to sand it down

Image

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sun Jun 15, 2014 7:58 pm
by curtiscapk
wow! awesome job ryan! :nutkick

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sun Jun 15, 2014 8:58 pm
by tuned
What the?? Yours came off a thousand times cleaner than mine! Lucky bast&$d you

Re: 2014 custom southbay 925 chassis rebuild

Posted: Mon Jun 16, 2014 5:00 am
by ToonGuy
For sure. Mine took the top layer of Ply off with most of it.

Re: 2014 custom southbay 925 chassis rebuild

Posted: Mon Jun 16, 2014 2:47 pm
by Mrtoler
Haha, ya almost no residue un the carpet but the vinyl is another story. Any tips for removing it? I planned on renting a drum sander and going to town!

Re: 2014 custom southbay 925 chassis rebuild

Posted: Tue Jun 17, 2014 5:01 am
by ToonGuy
If it's soft and not too uneven you might think about leaving it.

Re: 2014 custom southbay 925 chassis rebuild

Posted: Tue Jun 17, 2014 10:50 am
by tuned
Mrtoler wrote:Haha, ya almost no residue un the carpet but the vinyl is another story. Any tips for removing it? I planned on renting a drum sander and going to town!
I did exactly that and it did help some, although not totally effective. Get coarse paper and plan on plugging some up with the glue.

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sun Jun 29, 2014 4:22 pm
by Mrtoler
Got my parts I ordered in, only to open the box and find out he sent the wrong console [:x] ... I called him and he proceeded to tell me it was my fault! Long story short, I have to pay to freight it back to him and he's going to send me the right one....I will never do buisness with bill in Salem again!

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sun Jun 29, 2014 7:33 pm
by curtiscapk
Damn! I thought he was a heads up dude.

Re: 2014 custom southbay 925 chassis rebuild

Posted: Sun Jun 29, 2014 7:38 pm
by Mrtoler
Ya I did to, I've used him before with good luck! But god forbid he screws up, he starts crawfishing and pointing fingers instead of taking care of his mistake

Re: 2014 custom southbay 925 chassis rebuild

Posted: Wed Jul 09, 2014 9:32 pm
by Mrtoler
Dropped the boat off today at a local guys house, he's gonna put a mirror shine on my tubes for me. I'm suppose to get it back on Sunday so I'll post pics then. On another note, my console will be here tomorrow so hopefully I can get some quotes on building the fiberglass raised helm stand and galley them mold it all together.

Re: 2014 custom southbay 925 chassis rebuild

Posted: Thu Jul 10, 2014 5:06 am
by ToonGuy
:thumbsup

Re: 2014 custom southbay 925 chassis rebuild

Posted: Thu Jul 10, 2014 7:46 pm
by Mrtoler
Here's a couple progress pics of the polishing. Keep in mind that he still has another stage after this, but I'm super happy already!!!

Image

Image

Image