fastening fernce sheet with adhesive
Moderators: Redneck_Randy, badmoonrising, lakerunner
fastening fernce sheet with adhesive
I have a 88 Landau I'm rebuilding, wondering if any one has used a combination of pop rivets and adhisive to fasten the fence aluminum to the pen square tube , my old fence was fastened with pop rivets every 4 inches?
- HandymanHerb
- Site Admin
- Posts: 14315
- Joined: Fri Mar 17, 2006 8:57 pm
- Location: Orlando Fla
Re: fastening fernce sheet with adhesive
I think that's the standard way to do it, double sided tape and pop rivets... I would strongly recommend the tape to prevent rattles. I skipped that step on my last boat and a couple panels would rattle on occasion...
Ryan, Martha, Ana and Nathan Toler.
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas
(SOLD)1992 24' monark sun spa 240 1996 (rebuilt) Johnson 112
2014 South Bay chassis (IN THE WORKS)
2006 dodge ram quad cab
Crosby Texas
Re: fastening fernce sheet with adhesive
Thanks for the help, I thought a thin coat of panel cement would do and save a lot of holes re drilled. Herm