Page 1 of 2
ok i am confused now
Posted: Mon Mar 04, 2013 11:27 am
by rlcrews
ok i no longer know what to believe now . due to another post here concerning getting lift and how to get that i was steered a way from one in favor of another option . i just visited a website for the pontoon water glide , and read thru an article comparing the 2 different options with the one (tap fins versus strakes) winning .
and this was on the internet so it has to be true right
can i getting some clarity on the article with out getting a whipping for bringing this up once again .
Re: ok i am confused now
Posted: Mon Mar 04, 2013 11:54 am
by ToonGuy
Use the search feature. Search for Tap Fins in topic titles, and spend the rest of your day reading up on the cons and cons.

Re: ok i am confused now
Posted: Mon Mar 04, 2013 12:30 pm
by curtiscapk
and cons
Re: ok i am confused now
Posted: Mon Mar 04, 2013 1:14 pm
by pond tuuunes
All the Fast pontoons I see have strakes, I dont even know what a tab fin is. Hope that helps. JT
Re: ok i am confused now
Posted: Mon Mar 04, 2013 2:39 pm
by HandymanHerb
We tried for five years to get before and after spec numbers on tap fins, our welding expert on the forum many years back got a set for free and we were finely going get before and after numbers,that was before the days of cheap GPS's so a member was even going to send send his GPS to use in the test, then FusionKing was never heard from again after being our welding expert for years
Re: ok i am confused now
Posted: Mon Mar 04, 2013 3:06 pm
by slingshot
Re: ok i am confused now
Posted: Mon Mar 04, 2013 4:07 pm
by Redneck_Randy
The water glide is hard to tune and may need to be removed and reinstalled several times before finding the sweet spot for it to work correctly.
Go with strakes
Re: ok i am confused now
Posted: Mon Mar 04, 2013 10:58 pm
by badmoonrising
Re: ok i am confused now
Posted: Tue Mar 05, 2013 6:51 am
by tuned
Although I have a WaterGlide and am quite satisfied with the performance V cost, I must agree with Redneck Randy here. Go with factory strakes. Add-on strakes (flap tins, I mean fap pins, I mean....Tap Fins

) are just asking for trouble because of the risk of hand welding long runs on thin aluminum.
The WG is groovy but as Randy mentioned, must be carefully tuned. Be prepared to spend a fair amount of time scrunched underneath ur toon.
Re: ok i am confused now
Posted: Tue Mar 05, 2013 9:13 am
by ToonGuy
tuned wrote: (flap tins, I mean fap pins, I mean....Tap Fins

)
You forgot Fap Fins

Re: ok i am confused now
Posted: Tue Mar 05, 2013 10:18 am
by margaritaman
Almost any decent pontoon manufacturer will install lifting strakes on their toons but I do not know any of them that will install fap fins.
Re: ok i am confused now
Posted: Tue Mar 05, 2013 10:34 am
by curtiscapk
wha tare this fin faps you speak of?

Re: ok i am confused now
Posted: Tue Mar 05, 2013 11:15 am
by margaritaman
Re: ok i am confused now
Posted: Tue Mar 05, 2013 12:56 pm
by lakerunner
dum't fergot thy mek bening misabld hve a snother rod
Re: ok i am confused now
Posted: Tue Mar 05, 2013 1:05 pm
by Texoma Toon