Wife is doing great! EzFenders are back and doing fine, also
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
- Posts: 1872
- Joined: Wed Nov 12, 2008 6:28 am
- Location: Iowa/Lake of the Ozarks, Mo.
- Contact:
Wife is doing great! EzFenders are back and doing fine, also
It is with regret that I have to tell you that as of this month, I am discontinuing EzFenders. It has been my hopes that I could take the business to the point that it could be a household name in the boating community. And I think we were getting close to that point. I was so close with landing a deal with Walmart and Overtons. However, life has taken a different direction. My wife, Denise, has just been diagnosed with breast cancer and I am still working a ton of overtime at the plant, so something has to give. EzFenders was a great "hobby" business. I met thousands of different people and made a ton of friends, not only here but in the entire boating community. Its kinda cool to be out on the lake and have someone yell your name and realize its an EzFender customer. Its hard to shut the switch off, but with all that is going on, its time.
When things are better with Denise and we get some new hires trained at the plant, I'm hoping to have the time again to fire up the milling process and bring them back to life, with a fresh version. Plans were in the making for a whole different look. But, it will have to be shelved for awhile.
I'm not going anywhere, so you are all still stuck with this pain in the ass, giving bad advise and all.
Thanks everyone!
Bryan and Denise-(BryDen24SHP)
I have sold my remaining stock to Ty at PontoonStuff, he will be more than happy to get some into your hands, if needed.
Edited Post. This post was made after a tough decision was made. Since, we have gotten back to work, started up production and are back at it. There are a lot of posts to read to be updated to present... 12/3/14. But feel free to read on.
When things are better with Denise and we get some new hires trained at the plant, I'm hoping to have the time again to fire up the milling process and bring them back to life, with a fresh version. Plans were in the making for a whole different look. But, it will have to be shelved for awhile.
I'm not going anywhere, so you are all still stuck with this pain in the ass, giving bad advise and all.
Thanks everyone!
Bryan and Denise-(BryDen24SHP)
I have sold my remaining stock to Ty at PontoonStuff, he will be more than happy to get some into your hands, if needed.
Edited Post. This post was made after a tough decision was made. Since, we have gotten back to work, started up production and are back at it. There are a lot of posts to read to be updated to present... 12/3/14. But feel free to read on.
Last edited by Bryden24shp on Wed Dec 03, 2014 8:30 pm, edited 4 times in total.
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
- STEVEBRENDA
- Posts: 906
- Joined: Wed Sep 29, 2010 6:08 am
- Location: Boat on Table Rock Lake, MO
Re: No more EzFenders
Sorry to hear of your wife's breast cancer. Best of luck fighting the beast., I know several who have.
In our thoughts and prayers.
In our thoughts and prayers.
2014 Regency 254
Mercury 250L Verado
I'm not saying let's go kill all the stupid people.. I'm just saying let's remove all the warning labels and let the problem work itself out.
Mercury 250L Verado
I'm not saying let's go kill all the stupid people.. I'm just saying let's remove all the warning labels and let the problem work itself out.
- curtiscapk
- Posts: 5401
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: No more EzFenders
Sorry to hear about this Bryan.....on both accounts. Hopefully everything turns out ok.
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
Re: No more EzFenders
Family comes first.
Look after that Lady of yours and get through this stronger than before.
Sending our thoughts and best wishes to you both.
Look after that Lady of yours and get through this stronger than before.
Sending our thoughts and best wishes to you both.
Used to be a 2013 Sylvan Mirage Cruise 8520 LE powered by a Merc 50 Bigfoot.
Now we have a 2019 Sylvan Mirage 8522 DLZ LE powered by a Yamaha VF150..
2010 F-150 4.6L to haul it around.
You'll find us enjoying life on the Wabigoon.
Now we have a 2019 Sylvan Mirage 8522 DLZ LE powered by a Yamaha VF150..
2010 F-150 4.6L to haul it around.
You'll find us enjoying life on the Wabigoon.
-
- Posts: 1872
- Joined: Wed Nov 12, 2008 6:28 am
- Location: Iowa/Lake of the Ozarks, Mo.
- Contact:
Re: No more EzFenders
Thanks Guys! She is in very good hands at the clinic and her spirits are good! She has had a lot of "Pity Parties" and that's A-OK! Last night was the first time she has slept all night through without soaking the pillow in the last week. The initial shock is over, I got FMLA time from work, so we are off to Ia City for a 2nd opinion, tomorrow and the surgery is schedule for next week. She is all that matters right now...I will sure keep you posted!
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
-
- Posts: 365
- Joined: Tue Nov 29, 2011 1:00 pm
- Location: California Central Coast
Re: No more EzFenders
wishes for the best for Denise.
Glenn
Glenn
2008 SunTracker Regency Party Barge 22 with lifting strakes
2008 Mercury 115 4 stroke
2008 Mercury 115 4 stroke
- Texoma Toon
- Posts: 2675
- Joined: Tue Nov 21, 2006 7:35 am
- Location: Lake Texoma, Texas
Re: No more EzFenders
Sorry to hear this Bryan! On both accounts. They are making good progress in treating Beast Cancer. It is a hard thing to go thru. We went thru two bouts of it but it all worked out in the end.
I love my EZ Fenders. They worked great.
Any chance you can sell the product line to someone?
I love my EZ Fenders. They worked great.
Any chance you can sell the product line to someone?
2007 G3 LX 22 Fish & Cruise
90 Hp Yammy
Dual Axle Trailer
The proud American will go down into Obama's slavery without a fight, beating his chest and proclaiming to the world how free he really is. The world will only snicker. - Pravda
90 Hp Yammy
Dual Axle Trailer
The proud American will go down into Obama's slavery without a fight, beating his chest and proclaiming to the world how free he really is. The world will only snicker. - Pravda
- HandymanHerb
- Site Admin
- Posts: 14315
- Joined: Fri Mar 17, 2006 8:57 pm
- Location: Orlando Fla
- Cycleman07
- Posts: 306
- Joined: Thu Mar 21, 2013 11:14 am
- Location: Tulsa, Oklahoma
Re: No more EzFenders
Prayers for Denise coming her way. Keep us posted.
2013 South Bay 524E/Mercury 150 4Stroke
2011 GMC Sierra 2500 HD SLT 4x4 Duramax
2011 GMC Sierra 2500 HD SLT 4x4 Duramax
Re: No more EzFenders
Prayers are with you folks Bryan, I know several people that have kicked this in the ass, including my mother and grandmother.
Freedom Lovin' gun crazy Redneck
2010 Premier Sunsation LTD 225 PTX
2010 150 HP Mercury Optimax
got rid of POS 2010 Yacht club dual axle triple log trailer
now have a 2012 Shoreland'r dual axle triple log trailer, MUCH NICER
2010 Premier Sunsation LTD 225 PTX
2010 150 HP Mercury Optimax
got rid of POS 2010 Yacht club dual axle triple log trailer
now have a 2012 Shoreland'r dual axle triple log trailer, MUCH NICER
Re: No more EzFenders
Bryan, sorry to hear about both issues. Our thoughts and prayers are with you and Denise. Everytime I use our EZ Fenders, you will be on our mind.
Kim and Steve
2003 Lowe Suncruiser Trinidad 222
2003 Yamaha 90hp 4-stroke
2008 Toyota Tundra 5.7
Spend most of our time on Lake Eufaula
2003 Lowe Suncruiser Trinidad 222
2003 Yamaha 90hp 4-stroke
2008 Toyota Tundra 5.7
Spend most of our time on Lake Eufaula
Re: No more EzFenders
You will be in our thoughts and prayers.
John
John
2013 Elite 326 SunCatcher-G-3, 250 Yamaha SHO 4 stroke
Re: No more EzFenders
Prayers to you both!
Ferg's Tritoon Build
[url]http://www.pontoonforums.com/viewtopic.php?f=16&t=17012[/url]
[url]http://www.pontoonforums.com/viewtopic.php?f=16&t=17012[/url]
- badmoonrising
- Site Admin
- Posts: 10066
- Joined: Fri Mar 30, 2007 7:04 pm
- Location: Chesapeake City, Maryland
Re: No more EzFenders
Prayers to you and your family. I have stickied this topic as you asked..
Ed, Cheryl, Ethan and Aspen.
2013 Sun Tracker Party Barge 22 w/90 HP Mercury, "Hellrhighwater 2"
2014 E-350 Extended XLT.
Chesapeake City ,MD
2013 Sun Tracker Party Barge 22 w/90 HP Mercury, "Hellrhighwater 2"
2014 E-350 Extended XLT.
Chesapeake City ,MD
-
- Posts: 1872
- Joined: Wed Nov 12, 2008 6:28 am
- Location: Iowa/Lake of the Ozarks, Mo.
- Contact:
Re: No more EzFenders
Thanks, Ed. This way I can keep everyone informed of her progress, too.
Thank You, everyone! We appreciate all you do for us!
Bryan
Thank You, everyone! We appreciate all you do for us!
Bryan
Owner-EzFender Boat Products
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html
Members, visit your discount page at:
http://www.ezfender.com/PontoonForums-M ... -Page.html