E-Z Fender

Message

Capt Sully · #31 Post by **Capt Sully** » Wed Feb 25, 2015 12:17 pm

Well they say More and Bigger is better.

I use Four, sorry you can't see them, but they are EZ Fender clamps.

: EZ.jpg (116.32 KiB) Viewed 12516 times

robertm · #32 Post by **robertm** » Wed Feb 25, 2015 2:57 pm

Ok next simple question. If you tie a knot on the end of the fender rope that implies you leave the fenders there all the time?

If so do you tow like this too? I will be pulling the boat in and out of the water and towing it to various lakes every time we take it out. Not sure if I want the fenders slapping the sides of the boat going down the highway. Even speeding across the lake at close to 40 mph it seems like they could beat things up.

Thoughts?

curtiscapk · #33 Post by **curtiscapk** » Wed Feb 25, 2015 3:06 pm

Actually I tow my 3 miles with them out.... otherwise just flip em in! as for on the water haven't really experience anything at 20 mph!

Bryden24shp · #34 Post by **Bryden24shp** » Thu Feb 26, 2015 11:06 am

On a 25 footer, I recommend 4 per side. Just like Sully did. The thumbscrews won't back out any more. I am now cold sealing the last few threads. If anyone has any Pre-2015 models, a little dab of JB weld between the last 2 threads will keep them from acking out. Works better than pressing them. And if you want to take them out to mount a camera in place or something, you can get them out with a small pair of pliers and a rag between the teeth. I always recommend using a 3/8" fender line. The thicker the better. But 1/2" is kinda over kill on our pontoon boats. If you need them, just give me a yell. I'll get them out to you right away.

#35 Post by **mike** » Fri Feb 27, 2015 9:24 am

Do you want me to throw up an ad at the top with the member price shown and a link to this topic?

Bryden24shp · #36 Post by **Bryden24shp** » Fri Feb 27, 2015 11:41 am

mike wrote:Do you want me to throw up an ad at the top with the member price shown and a link to this topic?

Actually, I just got done building a new Forum Members discount webpage I was going to show you! Yes! That would be great Mike! You can just link the site if you would like!
Here is the site! http://www.ezfender.com/PontoonForums-M ... -Page.html
Thanks Mike!

Capt Sully · #37 Post by **Capt Sully** » Fri Feb 27, 2015 6:00 pm

Bryden24shp wrote:
mike wrote:Do you want me to throw up an ad at the top with the member price shown and a link to this topic?
Actually, I just got done building a new Forum Members discount webpage I was going to show you! Yes! That would be great Mike! You can just link the site if you would like!
Here is the site! http://www.ezfender.com/PontoonForums-M ... -Page.html
Thanks Mike!

Hey Bryan, That's a good looking Toon in the top right side of your discount page.

Happy to help out,

Bryden24shp · #38 Post by **Bryden24shp** » Sat Feb 28, 2015 4:44 am

Capt Sully wrote:
Bryden24shp wrote:
mike wrote:Do you want me to throw up an ad at the top with the member price shown and a link to this topic?
Actually, I just got done building a new Forum Members discount webpage I was going to show you! Yes! That would be great Mike! You can just link the site if you would like!
Here is the site! http://www.ezfender.com/PontoonForums-M ... -Page.html
Thanks Mike!
Hey Bryan, That's a good looking Toon in the top right side of your discount page.
Happy to help out,

Ya, that's a great pic! I have it plastered all over the place. Well, Denise told me to take it off the bedroom ceiling! Darn it!
Thanks for the pic. I'll take all I can get, I appreciate them, very much...

robertm · #39 Post by **robertm** » Mon Mar 02, 2015 6:56 am

Thanks very much for all the feedback. I will definitely be buying a few pairs of these. Going to wait until I actually get the boat to decide if I want 3 or 4 per side.

#40 Post by **mike** » Mon Mar 02, 2015 2:25 pm

ok, you need to add the l at the end of your signature link (.html), its returning a dead link as it is now...

#41 Post by **mike** » Mon Mar 02, 2015 2:33 pm

how does this look?

#42 Post by **HandymanHerb** » Mon Mar 02, 2015 2:52 pm

Bryden24shp · #43 Post by **Bryden24shp** » Tue Mar 03, 2015 10:52 am

mike wrote:ok, you need to add the l at the end of your signature link (.html), its returning a dead link as it is now...

Fixed!!!

Bryden24shp · #44 Post by **Bryden24shp** » Tue Mar 03, 2015 10:53 am

mike wrote:how does this look?

Yes, looks very good! Thanks Mike!

#45 Post by **mike** » Fri Mar 06, 2015 7:58 am

Ok, done!

Pontoon Boat & Deck Boat Forum

E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender

Re: E-Z Fender