
I set up with my 3Kpsi pressure washer and went to work. The normal spray nozzles didn't work near as well as that Turbo Nozzle from Northern Tool. Getting to the inside of all 3 toons was a challenge, so here's a tip that worked for me. I've got a house washing attachment for my pressure washer. Think of a wand that expands to 14 feet or so. Worked like a charm. All the bottom growth blew off to fertilize the grass.


Now, what to do about that stain from months sitting in lake water.

I tried a little mild degreaser without a lot of luck. Checked the local store and decided on some Starbrite Aluminum cleaner/restore. Sprayed it on, but after letting it sit, I worked it with that blue scotch-brite pad. This did a pretty half-ass job for the elbow grease involved. Its times like this I wish I had a skinny little grandson to squeeze inbetween those 3 pontoons and help "Pops" with some scrubbing! But I'll be waiting another 7-8 years before that happens.

So, this has been my week. Next up is to clean the spider crap and 303 the mooring cover which has yet to be done. Also, the snaps on the front skirt of the mooring cover were never installed, so that is on the list too.
Then back in the water and see how many mph this gains me. Just before hauling out, I got 25.8 on the gps. Best so far was 37. Damn lake growth!
Today is a great day out, mid 60's, (sorry you guys up north!). Tomorrow and Monday, 70's with sun. I'll probably splash her and see how much of a difference this work did.!
Everyone, enjoy your weekend!