Aluminum Brightner
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
tapleytown
- Posts: 2
- Joined: Mon May 23, 2016 6:19 am
Aluminum Brightner
I tried the aluminum Brightner and followed manufactures directions undiluted. it foamed and I rinsed within 20 sec. Test area turned white... Any suggestions?
Don and Gerri
Lake Tenkiller
2012 Sweetwater 200
2012 Yamaha 60
Lake Tenkiller
2012 Sweetwater 200
2012 Yamaha 60
Re: Aluminum Brightner
Acid washes turn the toons white....temporarily. They will return to the normal dull gray gradually.
Re: Aluminum Brightner
To make the toons look good, you'll have to polish them. I bought a bottle of White Diamond metal polish today at Advance Auto Parts, and will be pulling my boat (out of the boathouse) and putting it on the trailer. I need to change the lower unit grease anyway.
'12 Bennington 24' SSLX Yamaha 150
-
tapleytown
- Posts: 2
- Joined: Mon May 23, 2016 6:19 am
Re: Aluminum Brightner
Thanks, that white made me pause. After reading some of the posts I am going to dilute the product and try again. Would really like to get the water stains off. It stays in a slip so I have a lot of algae and the stains
- Attachments
-
- Test area
- image.jpeg (126.08 KiB) Viewed 1543 times
Don and Gerri
Lake Tenkiller
2012 Sweetwater 200
2012 Yamaha 60
Lake Tenkiller
2012 Sweetwater 200
2012 Yamaha 60
-
Soonertoon
- Posts: 333
- Joined: Sun Apr 06, 2014 8:19 pm
Re: Aluminum Brightner
Put it on full strength, coat the hell out of it, wait about 3 minutes and POWER WASH off. It will turn white but only temporarily.
Broken Arrow Ok
2014 G3 Suncatcher
115 Yamaha 4 stroke
Paradise Cove Marina on Ft. Gibson Lake
2014 G3 Suncatcher
115 Yamaha 4 stroke
Paradise Cove Marina on Ft. Gibson Lake