Easy Wiring for a Perko Switch
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
pepper1126
- Posts: 40
- Joined: Mon Mar 15, 2010 12:17 pm
Easy Wiring for a Perko Switch
Just bought a Perko switch from Bass Pro, can anyone out there tell me what else I need like wires, etc and how to wire the whole thing up, thanks?
Pepper1126
2007 G3 Suncatcher 25LX
Yamaha 115 2-Stroke
Lake Lanier, GA
2007 G3 Suncatcher 25LX
Yamaha 115 2-Stroke
Lake Lanier, GA
-
badmoonrising
- Site Admin
- Posts: 10066
- Joined: Fri Mar 30, 2007 7:04 pm
- Location: Chesapeake City, Maryland
Re: Easy Wiring for a Perko Switch
If you have a single engine, 2 battery setup, you'll need 2 more battery cables and stainless hardware to mount it.
Here's a diagram:
http://gator49.hostgator.com/~zeromyst/ ... NS1%29.pdf
Here's a diagram:
http://gator49.hostgator.com/~zeromyst/ ... NS1%29.pdf
Ed, Cheryl, Ethan and Aspen.
2013 Sun Tracker Party Barge 22 w/90 HP Mercury, "Hellrhighwater 2"
2014 E-350 Extended XLT.
Chesapeake City ,MD
2013 Sun Tracker Party Barge 22 w/90 HP Mercury, "Hellrhighwater 2"
2014 E-350 Extended XLT.
Chesapeake City ,MD
Re: Easy Wiring for a Perko Switch
Mine is wired just like diagram #1 in BMR's post. Here's a picture of mine. I made the little panel to mount it too out of some aluminum angle and a 1"x6".
You run the red (+) from both batteries to the switch and also positive lead from the motor. Then just a cable to connect the ground from 2nd battery to the 1st.
You run the red (+) from both batteries to the switch and also positive lead from the motor. Then just a cable to connect the ground from 2nd battery to the 1st.
2014 Tracker Targa V-18 Combo/ Mercury 150hp 4 stroke
'06 Dodge 1500 QC 4x4 Big Horn Hemi
Sheridan, Indiana
'06 Dodge 1500 QC 4x4 Big Horn Hemi
Sheridan, Indiana