Can't get max power (easily)
Moderators: Redneck_Randy, badmoonrising, lakerunner
- mytee_hercules
- Posts: 20
- Joined: Tue May 04, 2010 3:36 pm
- Location: Little Rock AFB, AR
Can't get max power (easily)
I have a 1996 Tracker 120 Force and I can't seem to keep it at full power -- semmingly due to the throttle or cabling or something. The throttle moves freely forward and reverse, but when I push it all the way to max power, if I don't keep pressure on the throttle, the handle moves back a fraction of an inch and the RPMs reduce.
I'm guessing it is a "simple" mechanical fix, but I'm not as familiar with the boat as I would like (took it out for it's 2nd trip last weekend). Anyone have a direction in which to look? Any pictures of if/where the adjustments can be made?
Thanks in advance for the help . . .
I'm guessing it is a "simple" mechanical fix, but I'm not as familiar with the boat as I would like (took it out for it's 2nd trip last weekend). Anyone have a direction in which to look? Any pictures of if/where the adjustments can be made?
Thanks in advance for the help . . .
Hangin' in Little Rock . . .

1996 Sun Tracker Party Barge 24
1996 Force 120hp 4-cyl 2-stroke
15p aluminum prop
25 mph @ 4800 rpm

1996 Sun Tracker Party Barge 24
1996 Force 120hp 4-cyl 2-stroke
15p aluminum prop
25 mph @ 4800 rpm
- lakerunner
- Site Moderator
- Posts: 4820
- Joined: Fri Mar 17, 2006 2:31 pm
- Location: Live in McAlester, Ok Boat on Tenkiller
- Contact:
Re: Can't get max power (easily)
some where on the throttle box should be a friction screw. It might be under the cover if you have a dash mounted shifter as opposed to side mount.
Loyd & Betty Meeks
Livin the lake life
2004 Tracker 22 Regency/2010 90 E-Tec. Pulled by Ford 2020 F 250,
McAlester, Oklahoma
Home lake is Tenkiller
Livin the lake life
2004 Tracker 22 Regency/2010 90 E-Tec. Pulled by Ford 2020 F 250,
McAlester, Oklahoma
Home lake is Tenkiller
- mytee_hercules
- Posts: 20
- Joined: Tue May 04, 2010 3:36 pm
- Location: Little Rock AFB, AR
Re: Can't get max power (easily)
The throttle is a Quicksilver 300 series without the trim buttons . . .

I think it's like a COMMANDER 3000 PANEL (88150A40 THRU A48)
Anyone know how or where to adjust this ?
Anyone have an electronic version of the owner's manual ?
Thanks in advance . . .

I think it's like a COMMANDER 3000 PANEL (88150A40 THRU A48)
Anyone know how or where to adjust this ?
Anyone have an electronic version of the owner's manual ?
Thanks in advance . . .
Hangin' in Little Rock . . .

1996 Sun Tracker Party Barge 24
1996 Force 120hp 4-cyl 2-stroke
15p aluminum prop
25 mph @ 4800 rpm

1996 Sun Tracker Party Barge 24
1996 Force 120hp 4-cyl 2-stroke
15p aluminum prop
25 mph @ 4800 rpm
- BassFrequency
- Posts: 706
- Joined: Tue Feb 16, 2010 3:09 pm
- Location: LOTO
Re: Can't get max power (easily)
mine 60 is doing a similar thing that started today but unfortunatly it aint related to the throttle
24' 1989 Starcraft 23.1mph gps
60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

- curtiscapk
- Posts: 5443
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: Can't get max power (easily)
brandon,
you know what it is?
you know what it is?
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
- BassFrequency
- Posts: 706
- Joined: Tue Feb 16, 2010 3:09 pm
- Location: LOTO
Re: Can't get max power (easily)
I think i sloshed a gas tank goober or somthing into the system + same spark plugs for 3 years (fouled to hell)
i get speed and power back temporarily when i push the key in for choke.
so it could be im loosing partial spark on one or more cylinders as i still barely hit 5k but its obvious shes loosing some power.
it only does it under load, if its reved in neutral, no prob.
fires right up like a champ but has just an ever so slight rough idle
i get speed and power back temporarily when i push the key in for choke.
so it could be im loosing partial spark on one or more cylinders as i still barely hit 5k but its obvious shes loosing some power.
it only does it under load, if its reved in neutral, no prob.
fires right up like a champ but has just an ever so slight rough idle
24' 1989 Starcraft 23.1mph gps
60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

- BassFrequency
- Posts: 706
- Joined: Tue Feb 16, 2010 3:09 pm
- Location: LOTO
Re: Can't get max power (easily)
got her fixed, runs like a rocket again.
high speed jets were clogging so ended up rebuilding all three carbs ($90 for three kits
)
also found a cracked open gas line where she was inhaling air in the wrong spot.
thats the update
high speed jets were clogging so ended up rebuilding all three carbs ($90 for three kits
also found a cracked open gas line where she was inhaling air in the wrong spot.
thats the update
24' 1989 Starcraft 23.1mph gps
60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

- curtiscapk
- Posts: 5443
- Joined: Mon Nov 10, 2008 8:31 am
- Location: OP KS\Hillsdale Lake
Re: Can't get max power (easily)
Yep ordering my carb kits this coming week. Maybe I can get the 115 to act like something more than a 40
How hard was it to get em synced?
How hard was it to get em synced?
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS
- BassFrequency
- Posts: 706
- Joined: Tue Feb 16, 2010 3:09 pm
- Location: LOTO
Re: Can't get max power (easily)
curtiscapk wrote:synced?
what do you mean
24' 1989 Starcraft 23.1mph gps
60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

60HP Evinrude
'96 GMC Jimmy "The Demon" custom 8 ball lever 4x4
no muffler or cat. just strait to the back

- mytee_hercules
- Posts: 20
- Joined: Tue May 04, 2010 3:36 pm
- Location: Little Rock AFB, AR
Re: Can't get max power (easily)
Anyone have this throttle and can help me find the way inside this thing to adjust the throttle ?

Hangin' in Little Rock . . .

1996 Sun Tracker Party Barge 24
1996 Force 120hp 4-cyl 2-stroke
15p aluminum prop
25 mph @ 4800 rpm

1996 Sun Tracker Party Barge 24
1996 Force 120hp 4-cyl 2-stroke
15p aluminum prop
25 mph @ 4800 rpm