Hoosier Scissor lift modification ideas

You know the drill..

Moderators: Redneck_Randy, badmoonrising, lakerunner

Post Reply
Message
Author
User avatar
Kitchen363
Posts: 46
Joined: Thu Jul 01, 2010 5:55 pm
Location: Northern Kentucky

Hoosier Scissor lift modification ideas

#1 Post by Kitchen363 » Sat Jul 31, 2010 8:11 pm

So after two minor malfuctions, I'm adding some bigger "Stops" to the trailer. Those small one inch high ones are not cutting it. After a hundred mile trip down the road the boat took a bounce and went over the stops Lucky for me the straps on the back did their job :shock: .

Also had problems where waves would push the boat too far foward while attaching the tie down straps durning loading :x

Look at my new "Stops" I used some 1 5/8" X 1 5/8" power strut (found at local electric supply shop or Home depot) and bolted them to the trailer with some U-bolts This boat will never come foward on me again.

Next mod is to hook a winch line up so I can crank the boat up to the stops
and pull up the ramp quickly. :thumbsup

Thinking of mounting more power strut under my existing hand crank for the trailer lift, and mount my hand crank out in front of it.

Anybody else done something like this
I need some ideas please :idea:
Attachments
DSC07858.JPG
DSC07858.JPG (142.71 KiB) Viewed 3814 times
DSC07856.JPG
DSC07856.JPG (115.5 KiB) Viewed 3811 times
2006 Bentley 200 Cruise
90HP Mercury 4-stroke
Underskined
Hoosier up/down trailer

User avatar
curtiscapk
Posts: 5443
Joined: Mon Nov 10, 2008 8:31 am
Location: OP KS\Hillsdale Lake

Re: Hoosier Scissor lift modification ideas

#2 Post by curtiscapk » Sat Jul 31, 2010 8:13 pm

Nice work!!
Craig and Paula
"THE FLOATER" rebuild Spring 2013
viewtopic.php?f=2&t=15328
94 Party Barge 24' 115 merc
Turning Point hustler 14 x 13 prop
22mph gps 3 people
12 F150
Overland Park Ks
Hillsdale Lake, KS

User avatar
FloterBoter
Posts: 2872
Joined: Wed Apr 19, 2006 11:42 pm

Re: Hoosier Scissor lift modification ideas

#3 Post by FloterBoter » Mon Aug 02, 2010 5:17 pm

i've seen them with the trailer cable winch (that you have) and the boat strap winch.
just make sure the boat strap winch is attached to the trailer well enough to handle
the load when the boat tries to slide backwards.

User avatar
FloterBoter
Posts: 2872
Joined: Wed Apr 19, 2006 11:42 pm

Re: Hoosier Scissor lift modification ideas

#4 Post by FloterBoter » Mon Aug 02, 2010 5:18 pm

right on the hoosier site:

Image

User avatar
Kitchen363
Posts: 46
Joined: Thu Jul 01, 2010 5:55 pm
Location: Northern Kentucky

Re: Hoosier Scissor lift modification ideas

#5 Post by Kitchen363 » Mon Aug 02, 2010 5:42 pm

Check this out. Here's what I came up with.
I used another peice of that Power strut, and mounted it under my cable winch.

This thing is stout :box

I got some rope on it for now but will maybe go with cable some day instead. I'm still going to put the big tie down straps on the front of the boat before I pull it out of the water, just for added saftey.

This should help with loading the boat, and the new stops should help so that boat never comes foward on the trailer again :eviltaunt
Attachments
DSC07891.JPG
DSC07891.JPG (113.2 KiB) Viewed 3657 times
DSC07890.JPG
DSC07890.JPG (126.68 KiB) Viewed 3652 times
DSC07889.JPG
DSC07889.JPG (122.51 KiB) Viewed 3649 times
2006 Bentley 200 Cruise
90HP Mercury 4-stroke
Underskined
Hoosier up/down trailer

User avatar
Kitchen363
Posts: 46
Joined: Thu Jul 01, 2010 5:55 pm
Location: Northern Kentucky

Re: Hoosier Scissor lift modification ideas

#6 Post by Kitchen363 » Sun Aug 08, 2010 4:22 pm

Got to try out the trailer today and everything worked great :)

I wasn't able to back too far into the water because the ramp dropped off. But with a boat load of people I hooked the rope winch line to the boat and reeled them in :drool
Hooked the straps on and I was outta there like a pro. The rough river water didn't give my no troubles with the new and improved stops.

If you got this same Hooiser trailer (2006) you got to try out this modification, makes loading the boat soooooooooooooooo much easier 8)
2006 Bentley 200 Cruise
90HP Mercury 4-stroke
Underskined
Hoosier up/down trailer

Post Reply