1992 monark 24' rebuild

[spurhunter]

Looking forward to seeing this completed. Your doing a great job.

[Mrtoler]

Got my rub rails painted today, everything looks good I can't wait till tomorrow so I install them here's a few pics!!!

Here's the primer









I didn't get a pic of the completed project because It got dark, I'll get a few tomorrow when I install them!

[Mrtoler]

I got some more pics of the rub rail, keep in mind that the tube risers will be painted also it was just to windy yesterday and the boat won't fit in the shop!













I'm also gonna get some new corner caps, they will get a nice coat of red also!!!!it's coming together!

[lx22f/c]

Looks great, can't wait to see thhe finished project.

[Mrtoler]

Got some stuff done today, my dad helped me finish up the fence panels where it needed more screws and the aluminum trim that covers the splice. Also got a good start on the helm stand. We built the frame out of the strips of plywood we had cut up awhile back! We didn't mount the top because we gotta drill some holes in the deck for the wiring and we still got to add some wood where the seat pedestal will be mounted to give it some beef to hold on to! We did mount the frame on the boat and while I had it up there I couldn't resist holding some LEDs up there to see what it would look like....also cut the aluminum c channel to dress up the top edge!



We added alot more bracing under it but I didn't get a pic

[Mrtoler]

Worked some more today on the boat. We mounted some wood under where the captain seat pedestal will be mounted to give it some beef to screw to! We also mounted the top deck of the helm stand for good, and we drilled 3 holes for the wiring and steering cable one in the console one in the stand and one in the floor! Got all my teak wood installed and looking good, tomorrow well grout it and hopefully bolt the console down along with some seats....if all goes well tomorrow there is a good chance we will wrap the sundeck with carpet and get it on the boat, then the gas tank can go in!!! Here's some pics







We also had enough scrap vinyl to cover the bottom frame of the stand

[spurhunter]

Really looking great!

[03gsxr]

Thanks, all parts where purchased from pontoonstuff.com, the seats themselves are made by WISE, alot of people sell them but I found the best price at pontoonstuff, plus they offer free shipping and no sales tax!!! I couldn't be happier with my seats I think they are great quality and well built seats...I'd buy them again....

thats where I bought my bench seats great price and free shipping

[Mrtoler]

If I could ever get all my seats mounted I'd do a cartwheel, I've had them for forever and I've set them on my boat and took them back down a thousand times ...I'm getting pretty close though, if I can finish my helm stand I could mount all my seats then it's just the wiring!

[Mrtoler]

Finished the grout in the teak yesterday, it took two goes but I've got nice results now

[badmoonrising]

That is nice, something I want to do to my old Starcraft when I rehab it again.

[Mrtoler]

Thanks, the teak was for sure alot of work but well worth it and looks awesome in my book!

[Mrtoler]

I finished up the engine cowl yesterday, it was ALOT of sanding and scraping but it looks pretty good and will look even better when I get my graphics on it...still have to paint the bracket that holds the motor but it will be fast and easy because I already sanded it!









Also got a real good start on wraping the sundeck, we decided to just go with carpet for now since the budget is blown outta the water and I'm wanting to finish this thing...we added aluminum angle to dress up the edges...I've still got to finish the trim but we ran out so another trip to lowes and it should be finished

[Mrtoler]

My dad helped me alot today and we got a ton of stuff done! We finished the helm stand and mounted the console and captain seat, we finished the sundeck and mounted it on the boat, we mounted all the couches and leanbacks, mounted one of the fishing chairs in the rear (still have 2 to left to mount). We got alot done and that means I'm getting closer to catching some fish!

[curtiscapk]

Sweet!!! Looks great!!