Help with Switch Panel

[BillieS]

All those switches, I would be more concerned about having enough batteries to supply all the power you are going to need to supply 8 switches and two accessory plugs. Electric ladder, electric anchor, flood lights, driving lights, air horns; uh! you get the idea

[ezrollin]

Thanks for your input guys, the two round things are 12v aux. outlet for cell phone charger, flip down 12v dvd player etc. I even have a small dual fan that plugs into the 12v outlet. I posted before really looking the thing over,I think pulling it out with the fuse panel is what threw me, of course the fuse panel is for un-switched circuits like my in-cabin overhead leds which have switches on them. I'm just a few days short of putting this thing in the water,weather permitting.Of course the motor hasn't been ran in a while so hopefully there will be no issues with it.

[tuned]

Even more fun pulling wire on the water! Been there.
Have you sorted out your main feed and fusing yet?

[ezrollin]

Yes,got the main feed hooked up and switch feeds to the led floods mounted on front rails.The overhead leds have their own swtches so I fed them off the fuse panel.
Lights better than I expected for night fishing.I will be installing a 20w led flood top bow for a docking light and one top stern to light engine bay area .W ill get some pics up later.