You know the drill..
Moderators: Redneck_Randy, badmoonrising, lakerunner
-
ralph
- Posts: 315
- Joined: Wed Apr 22, 2015 7:02 pm
- Location: Elyria, Ohio
#1
Post
by ralph » Tue Feb 09, 2016 1:33 pm
Having the pontoons painted with anti-fouling paint (TRILUX 33). The shop (who is experienced at this sort of thing...I hope) says they will lift/hoist my boat off of the trailer to paint the bottom half of the tubes.
They will lift the boat by the pop-up cleats which they say are built to do this.
I am a bit leary about that. Is it anyone's understanding that this can be done without damaging the boat (20' Sweetwater)?

2015 Sweetwater 2086 Coastal Edition - All Toon'd Up
2015 90 HP Yamaha
Mid American Dual Wheel Bunk Trailer
2017 4WD GMC Canyon
-
Gonefishing
- Posts: 637
- Joined: Wed Nov 14, 2012 5:56 pm
#2
Post
by Gonefishing » Tue Feb 09, 2016 1:56 pm
Don't know about using the pop up cleats. When I had mine done they lifted it up by the front and rear of the toons. On the very front and rear mine has a round hook like.
Bob Jacksonville, Nc
2013 Excursion X23 RFC
2013 115 Yamaha
Pulled with a Ford King Ranch
-
ralph
- Posts: 315
- Joined: Wed Apr 22, 2015 7:02 pm
- Location: Elyria, Ohio
#3
Post
by ralph » Tue Feb 09, 2016 2:04 pm
Mine does too. They are like round holes welded to each end of the pontoons. I can't figure out what they are doing, but if something goes wrong it's on their dime.
2015 Sweetwater 2086 Coastal Edition - All Toon'd Up
2015 90 HP Yamaha
Mid American Dual Wheel Bunk Trailer
2017 4WD GMC Canyon
-
Reiner
- Posts: 194
- Joined: Tue Mar 25, 2014 11:46 pm
- Location: San Diego
#4
Post
by Reiner » Tue Feb 09, 2016 2:19 pm
No way I would trust the pop-up cleats to lift the boat.
2015 Lowe SS 210 RFL XL Package 150 HP Merc
"The Nina" or "The Bismarck" my buddy's call it!
2011 Tundra
-
Seon
- Posts: 266
- Joined: Wed Sep 17, 2014 6:35 am
- Location: Lake Camanche, CA
#5
Post
by Seon » Tue Feb 09, 2016 4:08 pm
ralph wrote:...but if something goes wrong it's on their dime.
Suggest that you read the shop's disclaimer first. Best to have your own insurance

.
1989 28' Tracker Party Hut
115 hp 4 stroke Yamaha
Sacramento, Ca
-
teecro
- Posts: 1028
- Joined: Sat Jul 12, 2014 7:23 am
- Location: Sunset Bay, TN
#6
Post
by teecro » Tue Feb 09, 2016 4:58 pm
Reiner wrote:No way I would trust the pop-up cleats to lift the boat.
Exactly; no way would I allow my boat to be lifted via cleats that are merely screwed or even bolted through the wooden deck on their dime or not... If their are eyelets welded on to each end of the pontoons that is where they are designed to be lifted from...
T CRO
2017 Berkshire CTS 24 RFX with Yamaha F150/Simomized 200
2015 Caravelle 16 EBo with Mercury 90
-
COTTS4x4
- Posts: 160
- Joined: Sat Aug 03, 2013 1:35 pm
- Location: Central Florida
#7
Post
by COTTS4x4 » Tue Feb 09, 2016 7:01 pm
Your cleats won't hold, look under the deck. They will have to lift it by the eyes on the pontoons or a strap.
-
Attachments
-

- boat2.jpg (164.13 KiB) Viewed 2754 times
-

- boat3.jpg (165.05 KiB) Viewed 2753 times
[b][i]
2013 Sweetwater 2286 Triple Toon
T.O.T.A.L. Package - 150 Yamaha
[/i][/b]